|
03-04 Cobra Front Timing Cover Bolt Kits
|
|
Mounts Engine Timing Cover to front of engine.
|
MODSH0304CFCBKBO | MODSH0304CFCBK188SS | MODSH0304CFCBK316SS | MODSH0304CFCBKARPHBO | MODSH0304CFCBKARPHSS | MODSH0304CFCBKARP12PBO | MODSH0304CFCBKARP12PSS |
|
|
|
03-04 Cobra Alternator
Mounting Bracket Kit
|
|
This
Kit mounts the Alternator Mounting Bracket to the side of the engine. The Alternator mounts to this
|
MODSH0304CABKBO | MODSH0304CABK188SS | MODSH0304CABK316SS | MODSH0304CABKARPHBO | MODSH0304CABKARPHSS | MODSH0304CABKARP12PBO | MODSH0304CABKARP12PSS |
|
|
|
03-04 Cobra Alternator
Mounting Kit
|
|
The kit Mounts the Alternator
to the mounting bracket in the above kit
|
MODSH0304CAMKBO | MODSH0304CAMK188SS | MODSH0304CAMK316SS | MODSH0304CAMKARPHBO | MODSH0304CAMKARPHSS | MODSH0304CAMKARP12PBO | MODSH0304CAMKARP12PSS |
|
|
|
03-04 Cobra Top Alternator
Bracket Kit
|
|
The Top Alternator Bracket,
is located above the water pump, and below the SC drive pulley. This kit mounts that part.
|
MODSH0304CTABKBO | MODSH0304CTABK188SS | MODSH0304CTABK316SS | MODSH0304CTABKARPHBO | MODSH0304CTABKARPHSS | MODSH0304CTABKARP12PBO | MODSH0304CTABKARP12PSS |
|
|
|
03-04 Cobra Top Alternator
Bracket Idler W/ Anodized Washers
|
|
This is the same as above, only it includes the Anodized washers with it.
Pick your color when ordering.
|
MODSH0304CTABI188SS | MODSH0304CTABI316SS | MODSH0304CTABIARPHSS | MODSH0304CTABIARP12PSS |
|
|
|
03-04 Cobra Lower Alternator
Bracket Kit
|
|
Fastens the Lower Alternator
Bracket to the front of the engine.
|
MODSH0304CLABKBO | MODSH0304CLABK188SS | MODSH0304CLABK316SS | MODSH0304CLABKARPHBO | MODSH0304CLABKARPHSS | MODSH0304CLABKARP12PBO | MODSH0304CLABKARP12PSS |
|
|
|
03-04 Cobra Lower Alternator
Bracket Kit W/ Anodized Washers
|
|
Same as the Above Kit, just includes the Anodized Washers.
Pick your color when ordering.
|
MODSH0304CLABKW/AWBO | MODSH0304CLABKW/AW188SS | MODSH0304CLABKW/AW316SS | MODSH0304CLABKW/AWARPHBO | MODSH0304CLABKW/AWARPHSS | MODSH0304CLABKW/AWARP12PBO | MODSH0304CLABKW/AWARP12PSS |
|
|
|
03-04 Cobra Lower Crank Support Kit
03-04 Cobra Lower Crank Support, Idler Pulley
Anodized Washer Kit
|
|
The kit
fastens the Crankshaft Front Support Bracket to the front engine cover. It supports the crank from flexing.
This is a Anodized
Washer Kit, for the Idler Pulley on the Lower Crank Support Bracket.
Pick your color when ordering.
|
MODSH0304CLCSKBO | MODSH0304CLCSK188SS | MODSH0304CLCSK316SS | MODSH0304CLCSKARPHBO | MODSH0304CLCSKARPHSS | MODSH0304CLCSKARP12PBO | MODSH0304CLCSKARP12PSS |
MODSH0304CLCSKW/AW188SS | MODSH0304CLCSKW/AW316SS | MODSH0304CLCSKW/AWARPHSS | MODSH0304CLCSKW/AWARP12PSS |
|
|
|
03-04 Cobra Pulley Bridge
Bolt Kit
|
|
The Pulley Bridge, spans
the front of the engine and provides the support for the Supercharger Drive System.
|
MODSH0304CPBBKBO | MODSH0304CPBBK188SS | MODSH0304CPBBK316SS | MODSH0304CPBBKARPHBO | MODSH0304CPBBKARPHSS | MODSH0304CPBBKARP12PBO | MODSH0304CPBBKARP12PSS |
|
|
|
03-04 Cobra Lower Intake Manifold Bolt
Kit
03-04 Cobra Lower Intake
Manifold to Head Threaded Stud Kit
|
|
Here we have the kit that mounts the Lower Intake
manifold to the Heads.
This Threaded Stud Kit does
the same as above, only without the Socket Head Bolts, and with Threaded Studs
|
MODSH0304CBLIMKBO | MODSH0304CBLIMK188SS | MODSH0304CBLIMK316SS | MODSH0304CBLIMKARPHBO | MODSH0304CBLIMKARPHSS | MODSH0304CBLIMKARP12PBO | MODSH0304CBLIMKARP12PSS |
MODSTUD0304CBLIMK8.8 | MODSTUD0304CBLIMKARP300 | MODSTUD0304CBLIMKARP10.9 |
|
|
|
03-04 Cobra Blower to
Lower Intake Manifold Bolt Kit
03-04 Cobra Blower to Lower Intake Manifold Threaded
Stud Kit
|
|
The Blower Bolt Kit, mounts the Blower to the Upper Intake Manifold.
Same as above only we use Threaded Studs to mount the Blower.
|
MODSH0304CBLIMKBO | MODSH0304CBLIMK188SS | MODSH0304CBLIMK316SS | MODSH0304CBLIMKARPHBO | MODSH0304CBLIMKARPHSS | MODSH0304CBLIMKARP12PBO | MODSH0304CBLIMKARP12PSS |
MODSTUD0304CBLIMK8.8 | MODSTUD0304CBLIMKARP300 | MODSTUD0304CBLIMKARP10.9 |
|
|
|
03-04 Cobra Blower Bottom
to Intercooler Kit
|
|
On
this engine, the Inter-Cooler for the Intake Air Supply is located on the bottom of the Supercharger, this kit mounts that
Inter-Cooler.
|
MODSH0304CBBICKBO | MODSH0304CBBICK188SS | MODSH0304CBBICK316SS |
|
|
|
03-04 Cobra Blower Bottom
to Intercooler Kit, XL(oversized)
|
|
Standard thread size
for this kit is M5. Unfortunately, many times these bolts break or strip-out, causing us to re-thread them
to M6, this kit is the larger thread size.
|
MODSH0304CBBICKXLBO | MODSH0304CBBICKXL188SS | MODSH0304CBBICKXL316SS | MODSH0304CBBICKXLARPHBO | MODSH0304CBBICKXLARPHSS | MODSH0304CBBICKXLARP12PBO | MODSH0304CBBICKXLARP12PSS |
|
|
|
03-04 Cobra Blower Bottom
to Intercooler Threaded Stud Kit, XL(oversized)
|
|
Same as above, in M6…But
here we use Threaded Studs to hold the Inter-Cooler in place of Bolts.
|
MODSTUDBBICKXL8.8 | MODSTUDBBICKXLARP300 |
|
|
|
03-04 Cobra Inter-Cooler
Manifold Bolt Kit
03-04 Cobra Inter-Cooler Manifold Threaded Stud Kit
|
|
The
Inter-Cooler manifold is located under the Blower Pulley, on the front of the engine. This mounts that
part to the Lower Intake Manifold.
Same as above kit, but uses Threaded Studs instead of Bolts.
|
MODSH0304CICMKBO | MODSH0304CICMK188SS | MODSH0304CICMK316SS | MODSH0304CICMKARPHBO | MODSH0304CICMKARPHSS | MODSH0304CICMKARP12PBO | MODSH0304CICMKARP12PSS |
MODSTUD0304CICMK8.8 | MODSTUD0304CICMKARP10.9 |
|
|
|
03-04 Cobra Blower Snout
Kit Bolt Kit
|
|
The Blower Snout is
the long rigid housing that holds and supports the drive pulley for the Supercharger. This kit attaches
it to the SC Housing.
|
MODSH0304CBSBKBO | MODSH0304CBSBK188SS | MODSH0304CBSBK316SS | MODSH0304CBSBKARPHBO | MODSH0304CBSBKARPHSS | MODSH0304CBSBKARP12PBO | MODSH0304CBSBKARP12PSS |
|
|
|
03-04 Cobra Intake Manifold
Runner to Blower Bolt Kit
03-04 Cobra Intake Manifold Runner to Blower
Threaded Stud Kit
|
|
The Intake
Manifold Runner is the large part between the Blower Housing and the Throttle Body. This kit attaches it to the Blower
Body.
As above,
only here we use Threaded Studs for the fastener
|
MODSHALLEMBKBO | MODSH0304CIMRBK188SS | MODSH0304CIMRBK316SS | MODSH0304CIMRBKARPHBO | MODSH0304CIMRBKARPHSS | MODSH0304CIMRBKARP12PBO | MODSH0304CIMRBKARP12PSS |
MODSTUD0304CIMRBK8.8 | MODSTUD0304CIMRBKARP300 | MODSTUD0304CIMRBKARP10.9 |
|
|
|
03-04 Cobra Fuel Rail/ Manifold
Bolt Kit
|
|
Mounts the Fuel
Rail to the Intake Manifold sides
This kit mounts both OEM and Aftermarket Fuel Rails.
Have a special
FR that needs spacers? We can make a kit for you....
|
MODSH0304CFRBKBO | MODSH0304CFRBK188SS | MODSH0304CFRBK316SS | MODSH0304CFRBKARPHBO | MODSH0304CFRBKARPHSS | MODSH0304CFRBKARP12PBO | MODSH0304CFRBKARP12PSS |
|
|
|
03-04 Cobra Throttle
Body to Intake Manifold Runner Bolt Kit
03-04 Cobra
Throttle Body to Intake Manifold Runner Threaded Stud Kit
|
|
This Kit fastens the Throttle Body
to the Intake Manifold Runner.
Same as above, only here we use Threaded Studs to fasten the Throttle Body to the Intake
Manifold Runner.
|
MODSH0304CTBIMRBO | MODSH0304CTBIMR188SS | MODSH0304CTBIMR316SS | MODSH0304CTBIMRARPHBO | MODSH0304CTBIMRARPHSS | MODSH0304CTBIMRARP12PBO | MODSH0304CTBIMRARP12PSS |
MODSTUDTBIMR8.8 | MODSTUDTBIMRARP300 | MODSTUDTBIMRARP10.9 |
|
|
|
03-04 Cobra Vacuum Accessory
Bracket Bolt Kit
|
|
The Accessory Bracket
bolt to the Drivers Side of the Blower, this kit attaches it.
|
MODSH0304CVABBKBO | MODSH0304CVABBK188SS | MODSH0304CVABBK316SS | MODSH0304CVABBKARPHBO | MODSH0304CVABBKARPHSS | MODSH0304CVABBKARP12PBO | MODSH0304CVABBKARP12PSS |
|
|
|
03-04 Cobra Throttle
Cable Mounting Bracket Bolt Kit
|
|
The Throttle Cable Mounting
Bracket is located on the Top/Back side of the Blower. This kit fastens that bracket in place.
|
MODSH0304CTCMBKBO | MODSH0304CTCMBK188SS | MODSH0304CTCMBK316SS | MODSH0304CTCMBKARPHBO | MODSH0304CTCMBKARPHSS | MODSH0304CTCMBKARP12PBO | MODSH0304CTCMBKARP12PSS |
|
|
|
03-04 Cobra Solenoid
By-Pass Valve Mounting Kit
|
|
Fastens the Solenoid
By-Pass Valve to the Drivers Side/Middle of the Blower.
|
MODSH0304CSBPVKBO | MODSH0304CSBPVK188SS | MODSH0304CSBPVK316SS | MODSH0304CSBPVKARPHBO | MODSH0304CSBPVKARPHSS | MODSH0304CSBPVKARP12PBO | MODSH0304CSBPVKARP12PSS |
|
|
|
03-04 Cobra Supercharger
Drive Belt Guard Mounting Kit
|
|
The Supercharger Drive
Belt Guard is a Safety Issue, and is mounted on the front of the engine to cover the drive belt. This kit mounts that item.
|
MODSH0304CSCDBGKBO | MODSH0304CSCDBGK188SS | MODSH0304CSCDBGK316SS | MODSH0304CSCDBGKARPHBO | MODSH0304CSCDBGKARPHSS | MODSH0304CSCDBGKARP12PBO | MODSH0304CSCDBGKARP12PSS |
|
|
|
03-04 Cobra Cobra Valve
Cover Mounting Bolt Kit
03-04 Cobra Cobra Valve
Cover Threaded Stud Mounting Kit
|
|
Cobra Modular Engines have large,
Beautiful Valve Covers…This kit is what fastens them to the head with Bolts.
It takes two (2) Kits per
engine Like to have your Valve Covers, Coil Covers, Front Cover or anything
else Powder Coated? We can do it.
Just like the Above Kit, only this one uses Threaded Studs to fasten the Valve
Cover in place..
It takes two (2) Kits per engine
|
MODSH0304CCVCBKBO | MODSH0304CCVCBK188SS | MODSH0304CCVCBK316SS | MODSH0304CCVCBKARPHBO | MODSH0304CCVCBKARPHSS | MODSH0304CCVCBKARP12PBO | MODSH0304CCVCBKARP12PSS |
MODSTUDCVCBK8.8 | MODSTUDCVCBKARP300 | MODSTUDCVCBKARP10.9 |
|
|
|
03-04 Cobra Cobra Valve
Cover Mounting Bolt Kit W/ Anodized Washers
|
|
Here we use
the Bolt Kit to fasten the Valve Cover down, only this kit will also incorporate the Anodized Washers in it. The Washers
act as accents, and along with other kits, or by themselves, they look very nice and provide a nice color combo theme
Pick your color when ordering.
2 needed/Engine
|
MODSH0304CCVCBKW/AWBO | MODSH0304CCVCBKW/AW188SS | MODSH0304CCVCBKW/AW316SS | MODSH0304CCVCBKW/AWARPHBO | MODSH0304CCVCBKW/AWARPHSS | MODSH0304CCVCBKW/AWARP12PBO | MODSH0304CCVCBKW/AWARP12PS |
|
|
|
03-04 Cobra Coil Cover
Bolt Mounting Kit
03-04 Cobra Coil Cover Threaded Stud Mounting
Kit
|
|
The Coil Covers sit above the Valve
Cover, and are used to cover/protect the Ignition Coil Packs. This kit mounts those Covers.
It takes two (2) Kits
per engine
As above, only here we use Threaded Studs
to mount the Coil Covers.
It takes two (2) Kits per engine
|
MODSH0304CCCBKBO | MODSH0304CCCBK188SS | MODSH0304CCCBK316SS | MODSH0304CCCBKARPHBO | MODSH0304CCCBKARPHSS | MODSH0304CCCBKARP12PBO | MODSH0304CCCBKARP12PSS |
MODSTUDCCBK8.8 | MODSTUDCCBKARP300SS | MODSTUDCCBKARP10.9 |
|
|
|
03-04 Cobra Coil Cover Bolt Mounting Kit W/Anodized Washers
|
|
This Coil
Cover Bolt Kit is like above, only it also has Anodized Washers in it.
Pick your color when ordering.
2 needed/Engine
|
MODSH0304CCCBKW/AWBO | MODSH0304CCCBKW/AW188SS | MODSH0304CCCBKW/AW316SS | MODSH0304CCCBKW/AWARPHBO | MODSH0304CCCBKW/AWARPHSS | MODSH0304CCCBKW/AWARP12PBO | MODSH0304CCCBKW/AWARP12PSS |
|
|
|
03-04 Cobra Engine Coolant
Cross-Over Tube Bolt Kit
|
|
The Engine Coolant Cross-Over
Tube, mounts between the two Heads and transports the hot coolant out toward the Radiator. This kit mounts
that Tube.
|
MODSH0304CECCOTKBO | MODSH0304CECCOTK188SS | MODSH0304CECCOTK316SS | MODSH0304CECCOTKARPHBO | MODSH0304CECCOTKARPHSS | MODSH0304CECCOTKARP12PBO | MODSH0304CECCOTKARP12PSS |
|
|
|
03-04 Cobra Thermostat
Housing Bolt Kit
|
|
The Thermostat is located
in a 2-piece housing. This kit fastens that housing together.
|
MODSH0304CTHBKBO | MODSH0304CTHBK188SS | MODSH0304CTHBK316SS | MODSH0304CTHBKARPHBO | MODSH0304CTHBKARPHSS | MODSH0304CTHBKARP12PBO | MODSH0304CTHBKARP12PSS |
|
|
|
03-04 Cobra EGR Valve Bolt Kit
|
|
Fastens
the Exhaust Gas Recirculation Valve to the Intake Manifold....also works with EGR Block-Off Plates too.
Need a
Billet EGR Block-Off Plate? We have them...
|
MODSH0304CEGRVKBO | MODSH0304CEGRVK188SS | MODSH0304CEGRVK316SS | MODSH0304CEGRVKARPHBO | MODSH0304CEGRVKARPHSS | MODSH0304CEGRVKARP12PBO | MODSH0304CEGRVKARP12PSS |
|
|
|
03-04 Cobra Idle Air Control Valve Bolt Kit
|
|
The Idle Air Control
Valve is located on the front/Side of the Throttle Body. This kit Mounts that valve.
|
MODSH0304CIACVKBO | MODSH0304CIACVK188SS | MODSH0304CIACVK316SS | MODSH0304CIACVKARPHBO | MODSH0304CIACVKARPHSS | MODSH0304CIACVKARP12PBO | MODSH0304CIACVKARP12SS |
|
|
|
03-04 Cobra Engine Oil Cooler/Filter Mounting Bolt
Kit
03-04 Cobra Engine Oil Cooler/Filter Mounting Stud Kit
|
|
The Oil Filter/Cooler
Mount is located on the Driver Side/lower end of the engine. This kit mounts that part.
As above,
only this kit uses Threaded Studs to mount the Oil Filter/Cooler mount.
|
MODSH0304COCFMKBO | MODSH0304COCFMK188SS | MODSH0304COCFMK316SS | MODSH0304COCFMKARPHBO | MODSH0304COCFMKARPHSS | MODSH0304COCFMKARP12PBO | MODSH0304COCFMKARPPSS |
MODSTUDALLEOCFMK8.8 | MODSTUDALLEOCFMKARP300 | MODSTUDALLEOCFMKARP10.9 |
|
|
|
03-04 Cobra MAP/IAT Sensor
Bolt Kit
|
|
The Map/IAT Sensor stands for Manifold
Absolute Pressure/Intake Air temperature. It measures the Air Pressure or Boost Pressure in the Manifold and also the
temperature of that air. The ECM uses this information to adjust both fuel and timing to account for the readings. The sensor is located on the Driver's Side
of the very back edge of the Blower Base.
|
| MODSH03-04CMAPBKBO | | MODSH03-04CMAPBK18-8SS | | MODSH03-04CMAPBK316SS |
|
|
| |
|
|
|
|
|
Ford Modular 6G Alternator Case
Side
Bolt Kit
|
|
Holds the Alternator
Case halves together on the 6G Alternator.
The 6G is the Alternator used on most all 99-2004 Mustang GT's.
|
MODSHALL6GACSBKBO | MODSHALL6GACSBK188SS | MODSHALL6GACSBK316SS | MODSHALL6GACSBKARPHBO | MODSHALL6GACSBKARPHSS | MODSHALL6GACSBKARP12PBO | MODSHALL6GACSBKARP12PSS |
|
|
|
Ford Modular 4G Alternator Case
Side Bolt Kit
|
|
This kit is for the 4G Alternator, and it holds the
two (2) case haves together. The 4G Alternators were were used in many modles, and is notable in that it uses much smaller
(length) case side bolts then others. Some Applications include, Bullit, Mach 1, 99-01 Cobra as well as the 03-04 Cobra.
|
| MODSHALL4GACSBKBO | | MODSHALL4GACSBK18-8SS | | MODSHALL4GACSBK316SS | | MODSHALL4GACSBKARPHBO | | MODSHALL4GACSBKARPHSS | | MODSHALL4GACSBKARP12pBO | | MODSHALL4GACSBKARP12pSS |
|
|
|
Ford Modular 3G Alternator Case
Side Bolt Kit
|
|
This Bolt Kit is for the 3G Alternators...Ford used
this style Alternator on many early push-rod engines, as well as other modles. This unit has the long side case bolt
like the 6G, and was used on the 96-98 Mustang GT, and most Modular trucks and SUV's.
|
| MODSHALL3GACSBKBO | | MODSHALL3GACSBK18-8SS | | MODSHALL3GACSBK316SS | | MODSHALL3GACSBKARPHBO | | MODSHALL3GACSBKARPHSS | | MODSHALL3GACSBKARP12pBO | | MODSHALL3GACSBKARP12pSS |
|
|
|
99-01 Cobra
Crankshaft Sensor
Mounting Bolt Kit
|
|
Proper engine timing depends on knowing
the location at all times of several rotating parts. This Crankshaft Position Sensor, keeps the ECM informed as to where
the crank is in relation to everything else. These kits mount that Crankshaft Sensor to the Front Timing Cover
|
MODSHALLCRKSMKBO | MODSHALLCRKSMK188SS | MODSHALLCRKSMK316SS | MODSHALLCRKSMKARPHBO | MODSHALLCRKSMKARPHSS | MODSHALLCRKSMKARP12PBO | MODSHALLCRKSMKARP12PSS |
|
|
|
03-04 Cobra Idler Pulley Bolt
Kit
03-04 Cobra Idler Pulley Threaded
Stud Kit
|
|
The Idler Pulley
Bolts, Keep the Idler Pullies in place on the engine.
The
Idler Pulley Threaded Stud Kit mounts the Idler Pulley with a Stud instead of a Bolt.
|
MODSHALLIPMKBO | MODSHALLIPMK188SS | MODSHALLIPMK316SS | MODSHALLIPMKARPHBO | MODSHALLIPMKARPHSS | MODSHALLIPMKARP12PBO | MODSHALLIPMKARP12PSS |
MODSTUDALLIPMSK8.8 | MODSTUDALLIPMSKARP300 | MODSTUDALLIPMSKARP10.9 |
|
|
|
Alternator Voltage Regulator Bolt Kit |
|
The Voltage Regulator is located on the back on the Alternator. This kit allows you
to replace the factory hardware with new Black Oxide or shinny Stainless Steel hardware, for the most detail oriented custom
look.
|
|
|
| |
|
|
|
|
Alternator Brush Holder Screw Kit |
|
Keeping the details important, this kit replaces the Brush Cover located on the back of some
Alternators. For more information about your Alternator, see the Alternator Info Section.
|
|
|
Alternator Power Connections Nut Kit |
|
The Power
Cable Nut is the item the holds the Main Power Cable (large Cable) to the rear of the alternator. It is the cable that
re-charges the battery and runs the show. Replacing the old nut with a new Stainless Steel Nut will not only look sharp
but will ward-off corrosion and maintain a good electrical connection.
|
|
Alternator Systems:
Power Connection Mounting
|
| |
|
|
|
|
|
Ford Modular
Exhaust
Manifold Bolt Kit
|
|
This Mounts the Exhaust Manifold
or Headers to the Heads.
It takes two (2) Kits per engine
As Above, only this kit uses
Threaded Studs to mount the parts.
Two (2) Kits needed to complete one Engine
|
MODSHALLEMBKBO | MODSHALLEMBK188SS | MODSHALLEMBK316SS | MODSHALLEMBKARPHBO | MODSHALLEMBKARPHSS | MODSHALLEMBKARP12PBO | MODSHALLEMBKARP12PSS |
MODSTUDALLEMSK8.8 | MODSTUDALLEMSKARP300 | MODSTUDALLEMSKARP10.9 |
|
|
|
Ford Modular
Valve Cover
Mounting Bolt Kit
|
|
This kit Fastens the Valve Covers to the heads with the listed Bolt Kits.
Two (2) Kits needed to complete one Engine
This kit Fastens
the Valve Covers to the heads with the listed Threaded Stud Kits
|
MODSH99-04CVCBKBO | MODSH99-04CVCBKSS | MODSH99-04CVCBKSS316 | MODSH99-04CVCBKARPHBO | MODSH99-04CVCBKARPHSS | MODSH99-04CVCBKARP12BO | MODSH99-04CVCBKARP12SS |
MODSTUDCVCBK8.8 | MODSTUDCVCBKARP300 | MODSTUDCVCBKARP10.9 |
|
|
|
Ford Modular Valve Cover
Mounting Bolt Kit
W/Anodized Washers |
|
|
This kit Fastens the Valve
Covers to the heads with the listed Bolt Kits, and Anodized Aluminum Accent Washers for a unique look.
Two (2) Kits needed to complete one Engine
|
MODSH99-04CA/VCBKBO | MODSH99-04CA/VCBKSS | MODSH99-04CA/VCBKSS316 | MODSH99-04CA/VCBKARPHBO | MODSH99-04CA/VCBKARPHSS | MODSH99-04CA/VCBKARP12BO | MODSH99-04CA/VCBKARP12SS |
|
|
|
Ford ModularCoil Cover
Threaded Stud Kit
|
Coil Cover Threaded Stud
Kit
|
|
|
Here we use the listed Bolt Kits to Mount the Coil Covers to the Valve Covers.
Two (2) Kits needed to complete one Engine
Here we use the listed Threaded Stud Kits to Mount the Coil Covers to the Valve Covers.
|
MODSH99-04CCCBKBO | MODSH99-04CCCBKSS | MODSH99-04CCCBKSS316 | MODSH99-04CCCBKARPHBO | MODSH99-04CCCBKARPHSS | MODSH99-04CCCBKARP12BO | MODSH99-04CCCBKARP12SS |
MODSTUDCCBK8.8 | MODSTUDCCBKARP300SS | MODSTUDCCBKARP10.9 |
|
|
|
Ford Modular Coil Cover
Mounting
Kit W/ Anodized Washers
|
|
Here we use the listed Bolt Kits W/Anodized
Aluminum Accent Washers to Mount the Coil Covers to the Valve Covers.
Two (2) Kits needed
to complete one Engine
|
MODSH0304CCCBKW/AWBO | MODSH0304CCCBKW/AW188SS | MODSH0304CCCBKW/AW316SS | MODSH0304CCCBKW/AWARPHBO | MODSH0304CCCBKW/AWARPHSS | MODSH0304CCCBKW/AWARP12PBO | MODSH0304CCCBKW/AWARP12PSS |
|
|
|
|
|
The
AC Compressor is mounted on the Passenger side/lower front of the engine. It mounts with three long bolts, this kit
provides that hardware
|
MODSHALLACCMKBO | MODSHALLACCMK188SS | MODSHALLACCMK316SS | MODSHALLACCMKARPHBO | MODSHALLACCMKARPHSS | MODSHALLACCMKARP12PBO | MODSHALLACCMKARP12PSS |
|
|
|
Ford Modular Air Compressor Line, Mounting Bolt Kit
|
|
|
The AC Compressor is used to pressurize the gas in the AC system,
that gas passes both in and out of the Compressor through ports on the Compressor that hook to the hoses, this kit attaches
those hoses.
|
MODSH0304CACLMKBO | MODSH0304CACLMK188SS | MODSH0304CACLMK316SS | MODSH0304CACLMKARPHBO | MODSH0304CACLMKARPHSS | MODSH0304CACLMKARP12PBO | MODSH0304CACLMKARP12PSS |
|
|
|
Ford Modular
Oil Pan Mounting
Bolt Kit
Ford Modular
Oil Pan Mounting
Threaded
Stud Kit
|
|
The Engine Oil Pan, holds the oil Supply
for the engine. This supply is held in place by these Bolt Kits
The
Engine Oil Pan, holds the oil Supply for the engine. This supply is held in place by these Threaded Stud Kits
|
MODSHALLOPMKBO | MODSHALLOPMK188SS | MODSHALLOPMK316SS | MODSHALLOPMKARPHBO | MODSHALLOPMKARPHSS | MODSHALLOPMKARP12PBO | MODSHALLOPMKARP12PSS |
MODSTUDALLOPMK8.8 | MODSTUDALLOPMKARP300 | MODSTUDALLOPMKARP10.9 |
|
|
|
Ford Modular
Oil
Pan Mounting
Bolt Kit, Extra Long
Ford Modular
Oil
Pan Mounting
Threaded Stud Kit,
Extra Long
|
|
On some applications,
the Oil Pan needs longer Bolts/Studs due to the installation of Girdles, Spacers or Windage Trays. These kits supply
longer fasteners for such situations.
On some applications,
the Oil Pan needs longer Bolts/Studs due to the installation of Girdles, Spacers or Windage Trays. These kits supply
longer fasteners for such situations.
|
MODSHALLOPMKXLBO | MODSHALLOPMKXL188SS | MODSHALLOPMKXL316SS | MODSHALLOPMKXLARPHBO | MODSHALLOPMKXLARPHSS | MODSHALLOPMKXLARP12PBO | MODSHALLOPMKXLARP12PSS |
MODSTUDALLOPMKXL8.8 | MODSTUDALLOPMKXLARP300 | MODSTUDALLOPMKXLARP10.9 |
|
|
|
Ford Modular
Oil Pump Mounting
Bolt Kit
Ford Modular
Oil Pump Mounting
Stud Kit
|
|
The
Oil Pump is the Heart of the engine. It pumps engine oil through-out the engine protecting and lubricating bearings,
walls, and all moving parts. These kits is used to mount the Oil Pump to the block
|
| MODSHALLOPMBKBO | | MODSHALLOPMBKARPHBO | | MODSHALLOPMBKARP12PBO |
| MODSTUDALL8.8 | | MODSTUDALLARP300 | | MODSTUDALLARP10.9 |
|
|
|
Ford Modular
Rear Main Oil Seal
Plate Mounting Kit
Ford
Modular
Rear Main Oil Seal
Mounting Stud
Kit
|
|
The Rear Main Seal Plate, mounts to the very rear of the block. It provides a secure mounting point for the
Rear Main Oil Seal, which seals the back of the engine from leaking oil from around the crankshaft. These kits, are
used to mount the plate to the engine.
|
MODSHALLRMOSKBO | MODSHALLRMOSK188SS | MODSHALLRMOSK316SS | MODSHALLRMOSKARPHBO | MODSHALLRMOSKARPHSS | MODSHALLRMOSKARP12PBO | MODSHALLRMOSKARP12PSS |
MODSTUDALLRMOSK8.8 | MODSTUDALLRMOSKARP300 | MODSTUDALLRMOSKARP10.9 |
|
|
|
Ford Modular
Dip Stick Tube Kit
|
|
The Dip Stick measures the amount of
oil in the Oil Pan. This kit mounts the Dip Stick Tube to the engine side.
|
MODSHALLDSTKBO | MODSHALLDSTK188SS | MODSHALLDSTK316SS | MODSHALLDSTKARPHBO | MODSHALLDSTKARPHSS | MODSHALLDSTKARP12PBO | MODSHALLDSTKARP12PSS |
|
|
|
Ford Modular Power Steering Pump
Mounting Kit
Ford Modular
Pump Mounting
Stud Kit
|
|
The Power Steering
Pump is located on the engine front/drivers side. These kits mount that pump with Bolts or Studs.
|
MODSHALLPSPMKBO | MODSHALLPSPMK188SS | MODSHALLPSPMK316SS | MODSHALLPSPMKARPHBO | MODSHALLPSPMKARPHSS | MODSHALLPSPMKARP12PBO | MODSHALLPSPMKARP12PSS |
MODSTUDALLPSPMK8.8 | MODSTUDALLPSPMKARP300 | MODSTUDALLPSPMKARP10.9 |
|
|
|
Ford Modular
Water Pump
Mounting Bolt Kit
Ford Modular
Water Pump
Mounting Stud Kit
|
|
The Water Pump is mounted in the Front/Center of the engine.
It circulates the engine coolant through-out the engine and the complete cooling system. These kits mount that Water
Pump to it Mounting Location.
|
MODSHALLWPMKBO | MODSHALLWPMK188SS | MODSHALLWPMK316SS | MODSHALLWPMKARPHBO | MODSHALLWPMKARPHSS | MODSHALLWPMKARP12PBO | MODSHALLWPMKARP12PSS |
MODSTUDALLWPMK8.8 | MODSTUDALLWPMKARP300 | MODSTUDALLWPMKARP10.9 |
|
|
|
Ford Modular
Water Pump Pulley
Mounting Bolt Kit
Ford Modular
Water Pump
Pulley Mounting
Stud Kit
|
|
The Water Pump needs to be turned to
pump the engine coolant. To do that, the Water Pump Pulley is attached to the pump, and the Serpentine Belt turns the
Pulley. This kit mounts that Water Pump Pulley to the Pump.
|
MODSHALLWPPMKBO | MODSHALLWPPMK188SS | MODSHALLWPPMK316SS | MODSHALLWPPMKARPHBO | MODSHALLWPPMKARPHSS | MODSHALLWPPMKARP12PBO | MODSHALLWPPMKARP12PSS |
MODSTUDALLWPPMK8.8 | MODSTUDALLWPPMKARP300 | MODSTUDALLWPPMKARP10.9 |
|
|
|
Ford Modular
Water Heater
Connector Bolt Kit
|
|
The Water heater Connector is the fitting
on the back of the passenger side head. It routes hot water from the head to the heater core. This kit mounts
that fitting in place.
|
MODSHALLWHCBKBO | MODSHALLWHCBK188SS | MODSHALLWHCBK316SS | MODSHALLWHCBKARPHBO | MODSHALLWHCBKARPHSS | MODSHALLWHCBKARP12PBO | MODSHALLWHCBKARP12PSS |
|
|
|
Ford Modular
Water Heater Tube
Connector Bolt Kit
|
|
The Water Heater Tube Connector Kit,
is responsible for routing that hot water from the heater core, back to the Water Pump, The Tube is the passage way for this.
This kit mounts that tube.
|
MODSHALLWHTCKBO | MODSHALLWHTCK188SS | MODSHALLWHTCK316SS | MODSHALLWHTCKARPHBO | MODSHALLWHTCKARPHSS | MODSHALLWHTCKARP12PBO | MODSHALLWHTCKARP12PSS |
|
|
|
Ford Modular
Belt Tensioner
Mounting Bolt Kit
Ford Modular
Belt Tensioner
Mounting Stud Kit
|
|
The Belt Tensioner is what maintains
the correct tension on the serpentine belt. These kits are offered to mount that Belt Tensioner to the Front Timing
Cover. For the Popular 3-Bolt Belt Tensioner.
These Kits use Threaded Studs to keep
the Idler Pullies in place, instead of the traditional Bolt
|
MODSHALLBTMKBO | MODSHALLBTMK188SS | MODSHALLBTMK316SS | MODSHALLBTMKARPHBO | MODSHALLBTMKARPHSS | MODSHALLBTMKARP12PBO | MODSHALLBTMKARP12PSS |
MODSTUDALLBTMSK8.8 | MODSTUDALLBTMSKARP300 | MODSTUDALLBTMSKARP10.9 |
|
|
|
Ford Modular Belt Tensioner
(1-Bolt) Mounting Kit |
Ford Modular Belt Tensioner (1-Bolt)Mounting Stud Kit
|
|
|
The Belt Tensioner is what maintains
the correct tension on the serpentine belt. These kits are offered to mount that Belt Tensioner to the Front Timing
Cover. For the older 1-Bolt Belt Tensioner.
|
MODSHALL1BBTMKBO | MODSHALL1BBTMK188SS | MODSHALL1BBTMK316SS | MODSHALL1BBTMKARPHBO | MODSHALL1BBTMKARPHSS | MODSHALL1BBTMKARP12PBO | MODSHALL1BBTMKARP12PSS |
MODSTUDALL1BBTMSK8.8 | MODSTUDALL1BBTMSKARP300 | MODSTUDALL1BBTMSKARP10.9 |
|
|
|
Ford Modular Idler Pulley Mounting
Bolt Kit
Ford Modular
Idler Pulley
Mounting Stud Kit
|
|
The Idler Pulley
Bolts, Keep the Idler Pullies in place on the engine.
|
MODSHALLIPMKBO | MODSHALLIPMK188SS | MODSHALLIPMK316SS | MODSHALLIPMKARPHBO | MODSHALLIPMKARPHSS | MODSHALLIPMKARP12PBO | MODSHALLIPMKARP12PSS |
MODSTUDALLIPMSK8.8 | MODSTUDALLIPMSKARP300 | MODSTUDALLIPMSKARP10.9 |
|
|
|
|
Ford Modular
Camshaft
Sensor
Mounting Bolt Kit
|
|
The Camshaft Sensor, monitors the rotation/position of the Camshaft, so the engine ECM knows exactly where it is
in relation to the Crankshaft.
|
MODSHALLCAMSMKBO | MODSHALLCAMSMK188SS | MODSHALLCAMSMK316SS | MODSHALLCAMSMKARPHBO | MODSHALLCAMSMKARPHSS | MODSHALLCAMSMKARP12PBO | MODSHALLCAMSMKARP12PSS |
|
|
|
Ford Modular
Crankshaft Sensor
Mounting Bolt Kit
|
|
Proper engine timing depends on knowing
the location at all times of several rotating parts. This Crankshaft Position Sensor, keeps the ECM informed as to where
the crank is in relation to everything else. These kits mount that Crankshaft Sensor to the Front Timing Cover
|
MODSHALLCRKSMKBO | MODSHALLCRKSMK188SS | MODSHALLCRKSMK316SS | MODSHALLCRKSMKARPHBO | MODSHALLCRKSMKARPHSS | MODSHALLCRKSMKARP12PBO | MODSHALLCRKSMKARP12PSS |
|
|
|
Ford Modular Engine Oil Cooler/ Filter Mounting Bolt Kit
Ford Modular Engine Oil
Cooler/ Filter Mounting Stud Kit
|
|
The Engine Oil Filter/Cooler Mount is located on the driver's side/front of the engine. It allows engine oil to
pass in and out of the engine for cooling and filtering. These kits mount that mount.
|
MODSHALLEOCFMKBO | MODSHALLEOCFMK188SS | MODSHALLEOCFMK316SS | MODSHALLEOCFMKARPHBO | MODSHALLEOCFMKARPHSS | MODSHALLEOCFMKARP12PBO | MODSHALLEOCFMKARP12PSS |
MODSTUDALLEOCFMK8.8 | MODSTUDALLEOCFMKARP300 | MODSTUDALLEOCFMKARP10.9 |
|
|
|
Ford
Modular
Timing Chain
Tensioner Bolt
Kit (Long) Crank to Cam Chain,
Right
Side, Passenger
|
|
The Long Timing Chain Tensioner is the most stressed and vital Tensioner on the engine. The
long length between sprockets creates ample room for force multiplication, which has to be tamed by this Tensioner if proper
cam timing and performance is to be maintained. This kit mounts one Long Timing Chain Tensioner.
|
| MODSHALLLCCRSTBO | | MODSHALLLCCRSTARPHBO | | MODSHALLLCCRSTARPHSS | | MODSHALLLCCRSTARP12PBO | | MODSHALLLCCRSTARP12PSS |
|
|
|
Ford Modular
Timing Chain
Tensioner
Bolt
Kit (Long)Crank to Cam Chain,
Left Side (Driver)
|
|
The Long Timing Chain Tensioner is the most stressed and vital Tensioner on the engine. The long length between sprockets
creates ample room for force multiplication, which has to be tamed by this Tensioner if proper cam timing and performance
is to be maintained. This kit mounts one Long Timing Chain Tensioner.
|
| MODSHALLLCCLSTBO | | MODSHALLLCCLSTARPHBO | | MODSHALLLCCLSTARPHSS | | MODSHALLLCCLSTARP12PBO | | MODSHALLLCCLSTARP12PSS |
|
|
|
Ford
Modular
Timing Chain
Tensioner Guide/Pivot
Right (Passenger)
Bolt Kit
|
|
The Chain Guide Pivot Plate is the piece that presses
against the timing chain (Long) with tension supplied by the Chain Tensioner. On some engine, the Pivot Plate uses a
metal bushing to pivot on, this kit allows you to ditch the pivot pin, and replace it with a bolt. Check your application...
|
| MODSHALLCCTBPBO | | MODSHALLCCTBPARPHBO | | MODSHALLCCTBPARPHSS | | MODSHALLCCTBPARP12PBO | | MODSHALLCCTBPARP12PSS |
|
|
|
Ford Modular
Timing Chain
Tensioner Guide/Pivot
Left
(Driver's)
Bolt Kit
|
|
The Chain Guide Pivot Plate is the piece that presses
against the timing chain (Long) with tension supplied by the Chain Tensioner. On some engine, the Pivot Plate uses a
metal bushing to pivot on, this kit allows you to ditch the pivot pin, and replace it with a bolt. Check your application...
|
| MODSHALLCCTBPBO | | MODSHALLCCTBPARPHBO | | MODSHALLCCTBPARPHSS | | MODSHALLCCTBPARP12PBO | | MODSHALLCCTBPARP12PSS |
|
|
|
Ford Modular
Timing Chain
Guide Bolt
Kit (LongChain)
Right Side
(Passenger)
|
|
The Timing Chain Guide keeps the timing chain in-line
and from damaging the engine during RPM changes. This kit mounts the Left or passenger side Chain Guide to the engine.
|
| MODSHALLTCGRSBO | | MODSHALLTCGRS188SS | | MODSHALLTCGRS316SS | | MODSHALLTCGRSARPHBO | | MODSHALLTCGRSARPHSS | | MODSHALLTCGRSARP12PBO | | MODSHALLTCGRSARP12PSS |
|
|
|
Ford
Modular
Timing Chain
Guide Bolt
Kit (LongChain)
Left Side (Driver)
|
|
This Kit routes or guides the Timing Chain on the Left
or Drivers side. The Chain Guide is secured to the Head, Block and one bolt on the oil pump of some engines.
|
MODSHALLTCGLSBO | MODSHALLTCGLS188SS | MODSHALLTCGLS316SS | MODSHALLTCGLSARPHBO | MODSHALLTCGLSARPHSS | MODSHALLTCGLSARP12PBO | MODSHALLTCGLSARP12PSS |
|
|
|
Ford Modular
Timing Chain
Tensioner Bolt
Kit (Short Cam Chain)
Left Side (Driver)
|
|
This Kit mounts the Chain Tensioner between the Intake
and Exhaust Cams on the Left or Driver's Side. Keeping this chain tensioner in place is vital to engine
performance.
|
| MODSHALLSLSCTBO | | MODSHALLSLSCTARPHBO | | MODSHALLSLSCTARPHSS | | MODSHALLSLSCTARP12PBO | | MODSHALLSLSCTARP12PSS |
|
|
|
Ford
Modular
Timing Chain
Tensioner Bolt
Kit (Short Cam Chain)
Right Side (Passenger)
|
|
This Kit mounts the Chain Tensioner between the Intake
and Exhaust Cams on the Right or Passenger Side. Keeping this chain tensioner in place is vital to engine performance.
|
| MODSHALLSRSCTBO | | MODSHALLSRSCTARPHBO | | MODSHALLSRSCTARPHSS | | MODSHALLSRSCTARP12PBO | | MODSHALLSRSCTARP12PSS |
|
|
|
Ford Modular
Motor Mount
Center Nut Kit
|
|
The Center Nut, it the Nut that goes to the large single center mounted stud, extending from the Motor
Mount.
|
MODSHALLMMCSNKBO | MODSHALLMMCSNK188SS | MODSHALLMMCSNK316SS |
|
|
|
Ford Modular
Motor Mount
Case
Half Bolt Kit
|
|
On certain motor mounts, both stock and replacement,
the ceter section is 2-piece and bolted together. This kit replaces stock mounting hardware for a more custom
, stronger look. Two (2) kits needed for a complete set.
|
|
|
|
Ford
Modular Motor Mount Bolt Kit
Ford Modular
Motor Mount
Stud Kit
|
|
This kit
mounts your Motor Mounts (Both Sides) to the Engine Block. As above, only this kit uses Threaded Studs to mount the Motor Mounts
|
MODSHALLMMBKBO | MODSHALLMMBK188SS | MODSHALLMMBK316SS | MODSHALLMMBKARPHBO | MODSHALLMMBKARPHSS | MODSHALLMMBKARP12PBO | MODSHALLMMBKARP12PSS |
MODSTUDALLMMSK8.8 | MODSTUDALLMMSKARP10.9 |
|
|
|
Ford Modular
Starter Motor
Bolt Kit
Ford Modular
Starter Motor
Threaded Stud Kit
Ford Modular
Starter Motor
Threaded Stud Kit
|
|
Mounts Engine Starter to block. Works with both
2 and 3-Bolt Starters. As above, but uses Threaded Studs to mount the Starter
|
MODSHALLSMBKBO | MODSHALLSMBK188SS | MODSHALLSMBK316SS | MODSHALLSMBKARPHBO | MODSHALLSMBKARPHSS | MODSHALLSMBKARP12PBO | MODSHALLSMBKARP12PSS |
MODSTUDALLSMSK8.8 | MODSTUDALLSMSKARP300 | MODSTUDALLSMSKARP10.9 |
|
|
|
Ford Modular Starter Motor Power Connection Nut Kit
|
|
The Starter Motor is powered by a very larger battery
cable, this kit supplies the nut and washer that attaches the power cable to the starter motor.
|
| MODNUTALLSMPLN | | MODNUTALLSMPLNSS |
|
|
|
Ford Modular Starter Motor Case Bolt Kit
|
|
The Starter Motor case is held together by several very
long bolts, this kit supplies those bolts for a custom look.
|
|
|
|
Ford Modular Starter Motor Solenoid
Mount Kit
|
|
The solenoid is what pulls the starter motor gear in to engage the flywheel, when the starter is energized. This kit
mounts the solenoid to the starter motor with style.
|
| MODSHALLSMSBKBO | | MODSHALLSMSBK188SS | | MODSHALLSMSBK316SS |
|
|
|
Ford
Modular Bellhousing Bolt Kit
Ford Modular Bellhousing Threaded Stud Kit
|
|
This kit literally holds the engine and
transmission together. This is the Bellhousing Bolt Kit.
Like Above, but uses Threaded Studs not Bolts. Makes Transmission removal a snap. Saves
soft aluminum threads from damage. Racers love these!
|
MODSHALLBHBKBO | MODSHALLBHBK188SS | MODSHALLBHBK316SS | MODSHALLBHBKARPHBO | MODSHALLBHBKARPHSS | MODSHALLBHBKARP12PBO | MODSHALLBHBKARP12PSS |
MODSTUDALLBHSK8.8 | MODSTUDALLBHSKARP300 | MODSTUDALLBHSKARP10.9 |
|
|
|
Ford Modular Engine Stand Stud Kit
|
|
Engine Stand Bolt Kit,
allows you to fasten the engine to your engine stand to perform work. Makes for a safe and sturdy way to
mount engine. For those with Engine Stands with extra long stand-off's, we can offer a Extra Long Bolt Kit to accomodate
those type Engine Stands...Just give us a call.
|
MODSHALLESBKBO | MODSHALLESBK188SS | MODSHALLESBK316SS | MODSHALLESBKARPHBO | MODSHALLESBKARPHSS | MODSHALLESBKARP12PBO | MODSHALLESBKARP12PSS |
|
|
|
Ford Modular Passenger Side.. Dry Sump Mounting Plate Bolt Kit
|
|
Mounts the Dry Sump
Pump Plate to the Passenger Side of the engine.
|
MODSHALLDSPPKBO | MODSHALLDSPPK188SS | MODSHALLDSPPK316SS | MODSHALLDSPPKARPHBO | MODSHALLDSPPKARPHSS | MODSHALLDSPPKARP12PBO | MODSHALLDSPPKARP12PSS |
|
|
|
Ford Modular Driver's Side.. Dry Sump Mounting Plate Bolt Kit
|
|
Mounts
the Drivers Side Dry Sump Pump Plate to the engine.
|
MODSHALLDSDSPPKBO | MODSHALLDSDSPPK188SS | MODSHALLDSDSPPK316SS | MODSHALLDSDSPPKARPHBO | MODSHALLDSDSPPKARPHSS | MODSHALLDSDSPPKARP12PBO | MODSHALLDSDSPPKARP12PSS |
|
|
|
Ford Modular
4V Cam Bearing
Cap Bolt Kit
|
|
Kit mounts the Camshaft Bearing
Cap Mounts to the Head. Longer and Stronger Bolts allow a better/tighter Bearing Cap Union.
Two (2) Kits needed to complete one Engine
For:
All Years
|
| MODSH4V9904CBCBKBO | | MODSH4V9904CBCBK188SS | | MODSH4V9904CBCBK316SS | | MODSH4V9904CBCBKARPHBO | | MODSH4V9904CBCBKARPHSS | | MODSH4V9904CBCBKARP12PBO | | MODSH4V9904CBCBKARP12PSS |
|
ARP Stud set competes one
engine
|
|
Ford Modular
3V Cam Bearing
Cap Bolt Kit
|
|
Cam Shaft Bearing Assemblies, Socket Head Mounting Kits
Of all the items on the engine, this is the one area I would really tell everyone to replace the factory hardware
and up-grade to a better fastener. Think of all the stress that the camshafts and valve springs put on these bolts.
We use only the best, 12.9 DIN grade fasteners, you can't get any better, stronger or tougher fasteners for your Cam Bearing
Cap's! Kits come with Extra Long Bolts that sink further into the head for twice the holding strenght over stock
factory bolts and heavy duty washers.
Two (2) Kits needed to complete one Engine
|
| MODSH4V9904CBCBKBO | | MODSH4V9904CBCBK188SS | | MODSH4V9904CBCBK316SS | | MODSH4V9904CBCBKARPHBO | | MODSH4V9904CBCBKARPHSS | | MODSH4V9904CBCBKARP12PBO | | MODSH4V9904CBCBKARP12PSS |
|
ARP Stud set competes one
engine
|
|
Ford Modular
2V Cam Bearing
Cap Bolt Kit
|
|
Main Engine Bearing Cap Side Bolt, Socket Head Screw Kit
This is how and where it all started.....we
needed a extra strong, extra rigid, extra deep fastener to securely hold the Main Bearing Caps in-place. Since the Main
Bearing Caps can be considered the foundation of the engine, and any movement there will effect everything else, these bolts
had to be the best. This is where we turned, to find the 12.9DIN super tough socket head screws, and also the very,
very hard and precision machined Heavy Duty Washers that support, and spread the clamping forces over a wide area. These
are the best you can buy, and we even found that we could deep set the bolts an extra 5-10mm for an additional 75% more thread
contact, pull-out strength.
Two (2) Kits needed to
complete one Engine
10 - Socket Head Bolts
10 - Washers, HD XL
|
| MODSH96-042VCBCBO | | MODSH96-042VCBC188SS | | MODSH96-042VCBC316SS | | MODSH96-042VCBCARPHBO | | MODSH96-042VCBCARPHSS | | MODSH96-042VCBCARP12BO | | MODSH96-042VCBCARP12SS |
|
ARP Stud set competes one
engine
|
|
Ford Modular
Engine Block Main,
Side Bolt Kit
|
|
The Ford Modular
Engine, Uses a Side Bolt to secure each side of the Main Bearing Caps. This accounts for the incredible Strength and Durability
found in these Blocks. The newer Blocks use odd sized Side Bolts, so OEM Ford or ARP are the only outlets for replacements.
On the older Blocks both Cast Iron and Aluminum, they used more conventional thread
size, so we can offer a great alternative to the OEM replacement bolts set. The Older Teksid Block and the older Cast Iron
(03-04 Cobra) Blocks are listed here. For other blocks, and or ARP hardware, those kits are listed else ware on this page.
|
|
|
Engine Main SIde Bolt Kit (Aluminum Blocks) |
|
|
Aluminator, WAP or NVH Aluminum Block
MODSHALUMMSBK001
TEKSID Aluminum Block only
MODSHTEKSID001 Factory Ford Replacement Set
|
|
|
ARP 4.6L &
5.4L 2V/4V Head Studs
|
|
Head Studs
|
156-4101
Hex Nut 156-4301 12pt Nuts
|
|
|
ARP 4.6L &
5.4L 2V/4V ARP2000 Head Studs
|
|
Head Studs
|
256-4001
Hex Nuts 256-4201 12pt Nuts
|
|
|
ARP 4.6L &
5.4L 3V ARP2000 Head Studs
|
|
Head Studs
|
256-4002
Hex Nuts 256-4202 12pt Nuts
|
|
|
ARP 5.0L Coyote ARP2000 Head Studs 2011-2012
M12
|
|
Head Studs
|
256-4702
|
|
|
ARP 5.0L Coyote ARP2000 Head Studs 2013-Up M11
|
|
Head Studs
|
256-4301
|
|
| |
|
|
|
|
|
ARP 4.6L &
5.4L 2V/3V/4V Main Studs (without windage tray)
|
|
Main Studs
|
156-5401
2-Bolt Main 156-5802 4-Bolt Main
|
|
|
ARP 4.6L &
5.4L 4V Main Studs (with windage tray)
|
|
Main Studs
|
256-5701
4-Bolt Main
|
|
|
ARP 4.6L &
5.4L 3V Main Studs (with windage tray)
|
|
Main Studs
|
156-5901
4-Bolt Main
|
|
|
ARP 4.6L Main
Studs Supercharged Cobra with Windage tray (2003-2004)
|
|
Main Studs
|
156-5403
2-Bolt Main
|
|
|
ARP Side Bolts
- Early Aluminum Block M8
|
|
Side Bolts Bolt Size:
M8 x 1.25 x 50mm Socket Size: 13mm
|
156-5001
4-Bolt main
|
|
|
ARP Side Bolts
- Early Cast Iron Block M8
|
|
Side Bolts Bolt Size:
M8 x 1.25 x 50mm Socket Size: 13mm
|
156-5201
2-Bolt Main
|
|
|
ARP Side Bolts
- Late Aluminum Block M9
|
|
Side Bolts Bolt Size:
M9 x 1.50 x 1.80" Socket Size: 11mm
|
156-5002
4-Bolt Main
|
|
|
ARP Side Bolts
- Late Cast Iron Block M9 (except Boss 5.0L
|
|
Side Bolts Bolt Size:
M9 x 1.50 x 1.80" Socket Size: 11mm
|
156-5202
2-Bolt Main
|
|
|
ARP Side Bolts
- Boss 5.0L (Block # M-6010-BOSS5.0L) & 5.0LCoyote
M9
|
|
Side Bolts Bolt Size:
M9 x 1.50 x 1.80" Socket Size: 11mm
|
156-5203
2-Bolt Main
|
|
| |
|
|
|
|
|
ARP Harmonic
Balancer Bolt Kit 4.6L Modular V-8
|
|
Harmonic Balancer Bolts Bolt Size:
M12 x 1.50 x 1.80" Socket Size: 18mm
|
156-2501
|
|
|
ARP Harmonic
Balancer Bolt Kit 5.0LCoyote V-8
|
|
Harmonic Balancer Bolts Bolt Size:
M12 x 1.50 x 4.20" Socket Size: 19mm
|
156-2502
|
|
|
ARP Cam Bolt
Kit 4.6L & 5.4L
|
|
Cam Bolts Bolt Size:
M10 x 1.50 x 1.70" Socket Size: 18mm Bolt Size: M12 x
1.5 x 1.80" Socket Size: 18mm
|
256-1002
Pro Series 256-1001 Pro Series
|
|
|
ARP Cam Tower
Bolt Kit 4.6L & 5.4L 2V 4.6L & 5.4L 3V 4.6L 4V
|
|
Cam Bolts Socket
Size: 6mm Bolt Size: M6 x 1.0 x 1.825 - 2.070" M6 x 1.0
x1.85" M6 x 1.0 x 1.825 - 2.070"
|
156-1002
Pro Series 156-1001 Pro Series 156-1003 Pro
Series
|
|
|
ARP Flywheel
Bolt Kit 4.6L & 5.4L Modular V-8
|
|
Flywheel Bolts Bolt Size: M10 x
1.0 x 1.00" Socket Size:
|
254-2801
|
|
|
ARP Flywheel
Bolt Kit 5.0 Coyote V-8
|
|
Flywheel Bolts Bolt Size: M10 x
1.0 x .975" Socket Size:
|
156-2801
|
|
|
ARP Flexplate
Bolt Kit 4.6L & 5.4L Modular V-8
|
|
Flexplate Bolts Bolt Size: M10 x
1.0 x .800" Socket Size:
|
254-2901
|
|
|
ARP Pressure
Plate Bolt Kit 4.6L & 5.4L Modular V-8
|
|
Pressure Plate Bolts Bolt Size: M10 x
1.50 Socket Size:
|
156-2201
|
|
|
ARP Ring Gear
Bolt Kit 8.8 & 9" Ford
|
|
Ring Gear Bolts Bolt Size: 7/16-20
x .750" Socket Size: 3/4"
|
250-3003
|
|
