Pro Weld Performance Parts

Accessory Drive Components

Home
Bargin Pitt
What's New!
Socket Head Bolts, Nuts, Washers & Spacers
The Cobra Connection
Engine Blocks
Custom Wiring Harnesses & Electrical Supplies
Fuel Injection
Specialty Tools and Taps
Fittings
Insulation
Our Policies
Our Location
About Us
Complete 4.6L & 5.4L Engines
03-04 Cobra Assembly Manual
Inter-Cooler Coolant System
Cobra Specific Parts Page
ProWeld Projects Page
4.6L, 5.4L & 5.0L Parts and Accessories
Engine Building Service
Super Coolers
ProWeld 2, 3 & 4 Valve Heads
Ford 4.6L Dry Sump Kit
Coatings
Engine Bolt Kit Page
ARP Engine & Automotive Fasteners

Enter subhead content here

Accessory Drive Components

CobraFrontAssemblyDrawing.gif
Item Part Number Description
1 N605904 Bolt
2 N620480 Nut
3 6A946 Cover
4 17K814 Alternator bracket assembly
5 N811268 Bolts (2 req'd)
6 8620 Accessory drive belt
7 N606543 Bolt (4 req'd)
8 6L266 Timing chain tensioner
9 6268 Timing chain (2 req'd)
10 6M256 Timing chain guide
11 6L266 Timing chain tensioner
12 6L253 Timing chain tensioner arm
13 6268 Timing chain (2 req'd)
14 N804958 Bolt (2 req'd)
15 6B274 Timing chain guide
16 N606527 Bolt
17 19D269 A/C compressor
18 N806184 Bolts (3 req'd)
19 6306 Crankshaft sprocket
20 6L253 Timing chain tensioner arm
21 12A227 Ignition pulse ring
22 6C086 Engine front cover
23 N806177 Bolts (8 req'd)
24 N806300 Studs (5 req'd)
25 6700 Crankshaft front seal
26 6316 Crankshaft pulley
27 N806165 Washer
28 W701512 Stud
29 8A528 Water pump pulley
30 N806282 Bolts (4 req'd)
31 N806177 Bolts (4 req'd)
32 8501 Water pump
33 N808102 Bolt
34 19A216 Belt idler pulley
35 N804178 Nut
36 N806300 Harness support bracket
37 N806300 Stud
38 N806155 Bolt
39 6C315 Crankshaft position sensor
40 N806155 Bolt
41 6B288 Camshaft position sensor
42 N808920 Bolts (3 req'd)
43 6C254 Crankshaft extension support pulley
44 10153 Lower support bracket
45 N605909 Bolts (2 req'd)
46 8620 Accessory drive belt
47 N811268 Bolt
48 8B603 Belt idler bracket support
49 N808198 Stud
50 9N491 Hose and tube assembly
General Specifications
Item Specification
Accessory drive belt 6 ribs
Supercharger drive belt 8 ribs



Torque Specifications
Description Nm lb-ft lb-in
Belt idler pulley bolt 25 18
Drive belt tensioner bolt — 3.8L and 3.9L 82 60
Drive belt tensioner bolt — 4.6L 10 89
Drive belt tensioner bolt — Supercharged engine 25 18
Cooling hose mounting bolt 25 18
Belt idler support assembly bracket bolts 25 18
Air intake scoop bolts 25 18
Air intake scoop bracket bolt 25 18
Air intake scoop bracket nuts 25 18
Air intake scoop bracket throttle body nut 9 80
Exhaust gas recirculation (EGR) vacuum regulator solenoid bolts 10 89
Cnv0319.jpg

Above:  This is a picture of one of my Engines, you can see the Accessory Drive System very well here.  Notice the many Studs that are holding the Front Cover on, yet waiting to secure the Idler Pulley Support piece or other such parts.  You have to have these Bolts and Studs.


Accessory Drive System



     Engine Coolant Pump
                 or
         Water Pump

    Cobra1WPump.jpg    Cobra1WPump1.jpgCobra1WPump1.jpg

    CobraWPumps2.jpg
Above:  The Modular family has several different Water Pumps to choose from, for the 03-04 Cobra Engine we need the Short Snout Water Pump.  There is also a older and newer version of these pumps, we won't the newer version.  The newer version has the Pump fins enclosed, which makes for a more effecient Water Pump.

    The Engine Coolant Pump is located in the front of the Engine, centered.  It is driven by the Accessory Belt Drive and is very important to the Engine's Well being.  The 03-04 Cobra Engine makes huge power and that requires a lot of Heat in the Combustion Camber.  It's the Water Pumps responsibility to Circulate the Engine Cooant which transfeers the heat from the combustion process to the Engine Coolant so it can be transported to the Radiator, where the cooler air blows through the radiators core to carry away the excess heat.  This transaction happens over and over again while the Engine is running.  And none of it would work if the Water Pump didn't do it's job.
     There are several different Water Pumps in the Modular Family, you have a long and short Pump and old and newer designs.  The one we want for our Cobra S/C Engine is the short new design Pump.  This new design, where the water Pumps fins are enclosed, does a much better job of moving the Engine Coolant, then the open fin design.  Always start a new Engine with a New Water Pump, they are relatively cheap, and it makes no sense to use a used Pump.  I have installed both Ford and AC Delco Pumps with great results.  There is also a O-Ring that seals the Pump to the Engine Block, this is usually encluded with a new Pump, so make sure you get one.

Water Pump                                             2R3V-8501

Water Pump Bolts (4 Req'd)                    2R3V-N808102

Water Pump Pulley                                  2R3V-8A528
WP Pulley Bolts (4 Req'd)                       2R3V-N806282


     AC Compressor

  Cobra1ACCompressor.jpg    Cobra1ACCompressor1.jpg
Above:  The AC Compressors are as much a part of the Cobra engine as anything else.  The Drive Pulley is 6mm and there is no reason to re-use a old used Compressor on your new Engine.

     The AC Compressor is located on the passengers side down low.  It is held in place by three long bolts, and the pulley comes with the Compressor.  I like to always use a new AC Compressor, like the Water Pump on a new engine, it just keeps thing on a even scale, and completes the Engine.  The 03-04 AC Compressor uses a special manifold adapter, this adapter bolts to the back of the Compressor and allows the AC hoses to attach.  These don't come with the new Compressors, so make sure you find one used or new, cause you have to have it.  Also, most new compressors NO NOT come with OIL in the Compressor, so make sure you add the correct amount and type befor you use it.

AC Compressor                                                   2R3V-19D269
Compressor Bolts (3 Req'd)                                2R3V-N806184




    
Front Engine Cover 
                or
     Timming Cover


 Cobra1TCover1.jpg    Cobra1TCover.jpg
Above:  There is no way around this very, very important part of the Cobra Engine.  It is impossible to run the Eaton Supercharger without this piece.  Ford still sells them and I vote to just purchase it new and be done with it.  The Used ones that do show-up are old and in need of repair, and will end up costing you more then the new one.  Also don't forget to get the Bolts and Studs that go with the Front Cover.

     While all Modular Front Covers are demensionally the same, it's the lay-out on the front of the cover that is different.  The 03-04 Cobra Timming Cover is a uniqe one and is the only Timming Cover that will work with the Supercharged Engine.  These Covers are very hard to find used, and bring a pretty penny when they are for sale on web sites like E-Bay.  Generally there isn't to much to worry about, but I would stay away from cars that were involved in front end collissions or other simular accidents.  I have seen other Aluminum Timming Covers wear in the front seal area, they developed small cracks all around the circumforance of the seal.  These Front Engine Covers are still available form Ford, I have bought several and they generally list for  around $700.00.   When purchased new, the Front Cover comes with a new Belt Tensioner, all three pieces of the Front Cover Gasket and a new Idler Pulley, three items that are never there on a used one, so watch out and don't end up paying to much for a used Front Engine Cover.
     There are several bolts and studs that hold the Front Cover in place, but also are made to secure other item that mount in front of the Engine Cover.  These are very specific in both length and design, and have to be purchased from Ford.

Engine Front Cover                                             2R3Z-6019-BF
Bolts (8 Req'd)                                                    2R3V-N806177
Studs (5 Req'd)                                                   2R3V-N806300



     Front Cover Bolt Diagram

FrontCoverBoltChart.gif

Item Part Number Description
1 N806177 Bolt, Hex Flange Head Pilot, M8 x 1.25 x 53
2 N806177 Bolt, Hex Flange Head Pilot, M8 x 1.25 x 53
3 N806177 Bolt, Hex Flange Head Pilot, M8 x 1.25 x 53
4 N806177 Bolt, Hex Flange Head Pilot, M8 x 1.25 x 53
5 N806177 Bolt, Hex Flange Head Pilot, M8 x 1.25 x 53
6 N806300 Stud, Hex Shldr Pilot, M8 x 1.25 x 1.25 x 91.1
7 N806300 Stud, Hex Shldr Pilot, M8 x 1.25 x 1.25 x 91.1
8 N806177 Bolt, Hex Flange Head Pilot, M8 x 1.25 x 53
9 N806177 Bolt, Hex Flange Head Pilot, M8 x 1.25 x 53
10 N806177 Bolt, Hex Flange Head Pilot, M8 x 1.25 x 53
11 N806177 Bolt, Hex Flange Head Pilot, M8 x 1.25 x 53
12 W706560 Stud, Hex Head Pilot, M8 x 1.25 x 65 — M8 x 1.25 x 16
13 N806300 Stud, Hex Shldr Pilot, M8 x 1.25 x 1.25 x 91.1
14 N806300 Stud, Hex Shldr Pilot, M8 x 1.25 x 1.25 x 91.1
15 N806300 Stud, Hex Shldr Pilot, M8 x 1.25 x 1.25 x 91.1

     Idler Pulley Support

    Cobra1IPSAss1.jpg    Cobra1IPSAss.jpg
   Above: This is the Idle Pulley Support, It comes like you see it, with the Belt Tensioner, idler Pulleys attached.  This is a very hard piece to find, but be very carefull that if you do find one, you don't over pay as many on E-Bay have.

    The Idler Pulley Support Assembly is a large and very nesseccary piece for the 03-04 Cobra Engine.  It is the only modular Engine that uses this important piece, and that makes them scarce and expensive.  But be carefull not to confusse the issue, Ford still sells these pieces, and they often sell for more used then you can purchase a new part with all the additional pieces.  This is simply a case where the purchaser does not know his subject or the current prices very well, and gets taken because of it.  I always purchase this part new, and in my opinion you would be fullish not to.



    
Belt Tensioner

    BeltTensionerCover6Rib.jpg
Above:  Both Drive Sytems, Accessory Drive System and Supercharger Drive System, use the same Belt Tensioner.  Purchase the Front Cover and Idler Support Bracket new and you don't need to worry about this Item.

     If you used my advise you already have this item, it came with the new Front Engine Cover, but if not you will need a new one.  Don't even think about going used with this one, it serves a very important role in keeping the Accessory Belt tight.  These are very popular on E-Bay and generally sell for around $50.00.  The Engine requires two of them, and they are both the same part number, 

Belt Tensioner                                                      2R3Z-                     


     Idler Pulley

     Cobra1IPulley.jpg    mtb460089.jpgmtb460089.jpg
Above:  If you need any of the three Idler Pulleys the Drive System requires, why not think about buying one or more of these good looking beautys?  For only slightly more then the plain Stock Pulley sells for you could add some pizase and better performance to your 03-04 Cobra Engine.

     There are three Idler Pulleys on the Accessory Drive System.  They are all the same part number and are all made from stamped steel and have one, centrally located bearing,  supporting them.  I would like to see you use all new Pulleys, but if you have to purchase them, I would go with an aftermarket brand and not the factory Pulley.  The Aftermarket has several vendors that sell very nice Aluminum Billet Idler Pulleys.  These are supported by Double-Sealed Ball Bearings and are much stronger then factory pieces.  They are also available in different diameters and styles, which realy dress-up the front of the Engine.  While E-Bay sells the stock Factory Pulleys for $34.00, you could have a much stronger and better looking Pulley for just $10.00 more.

Idler Pulley                                                           2R3Z-19A216



     Drive Belt

     The Accessory Drive System uses one Drive Belt, part number 8620.  This Belt is the same as the Supercharger Drive Belt and should be bought new.  New Belts are not expensive nor hard to get.  I have used both Goodyear and Ford belts with success, and would think that as long as you stay with a known brand name, you would do fine.

Drive Belt                                                             2R3Z-8620


     Crankshaft Pulley

  CobraCPulley1.jpg   Cobra1CPulley2.jpg

     The Crankshaft Pulley is the heart of the Accessory Drive System.  This one piece supplies the power to turn all the other parts in the Accessory Drive System.  This part is often refeered to as the Balancer or Harmonic Balancer, but Ford never calls it that, only the Crankshaft Pulley, so I'll call it that also.  This is a very hard part to find used, and the few I have seen went for what a new Pulley would go for or more!  I would say to just purchase this part from the Ford dealer, yes it's expensive, but at least you know what you have.  You will also need the center bolt and washer, these I would get from a very well respected manufacturer, ARP.  They make quality fasteners for some of the industries most discriminating users.  I use them in as many places as I can, youu can never have to much of a Quality Product.
Crankshaft Pulley                                               2R3Z-6312-BAA
Washer                                                               2R3Z-N806165
Bolt                                                                     2R3Z-W701512


            Accessory Drive Layout

    AccessoryDrive.gif



    
Item Part Number Description
1 8678 Belt idler pulley
2 8678 Belt idler pulley
3 8678 Belt idler pulley
4 3A733 Power steering pulley
5 10344 Coolant pump pulley
6 6C254 Crankshaft pulley
7 6B209 Belt tensioner
8 19D784 A/C clutch pulley
9 8620 Drive belt

Enter supporting content here

Pro Weld

5937 Ethan Drive

Burlington, KY 41005

859-586-4069

Proweld@myway.com