|
2-Valve, Valve Cover Kit
Threaded Stud
|
|
2-Valve,
Valve Cover Kit
We use only the best Threaded Studs we can fine, then
combined that with the same Super Hard and Durable Washers we use in our Socket Head Kits, and throw in the right amount of
Flanged Nuts. This combo makes for a very strong and formidable fastener kit. Studs should always be used when
available and when the conditions allow.
This kit allows the installation of one Valve Cover. 11
- Threaded Studs 11 - Washers, HD 11 - Flanged Nuts
|
|
|
2-Valve, Front Engine (Timing) Cover
Threaded Stud
|
|
2-Valve, Front Engine
(Timing) Cover There isn't a better Threaded Stud Kit on the market, and Pro
Weld has them. This kit mounts the Front Engine (Timing) Cover to the engine. Threaded
Studs save wear and tear on threaded holes, especially when used in aluminum engine blocks. We used only
the finest pieces in our kits, and this one is no different. Kit does one
complete front engine cover ? - Threaded Studs ? - Washers, HD ? - Flanged Nuts
|
|
|
2-Valve, Water Pump Kit
Threaded Stud
|
|
2-Valve, Water Pump Kit
This kit mounts the Water Pump Securely to the front of the engine block.
We only use the best Threaded Studs, Washers and Flanged Nuts Available.
Kit mounts one Water Pump
4
- Threaded Studs
4 - Washers, HD
4 - Flanged Nuts
|
|
|
2-Valve, Oil Pan Stud Kit
Threaded
Stud
|
|
2-Valve, Oil Pan Stud Kit
Our Oil Pan Threaded Stud Kit is just the ticket for Racer. The Threaded Stud Kit allows multiple Oil Pan removals
to inspect the lower end, without fear of wear on the threaded holes in the engine. But, you also don't have to
be a racer to figure out the benefit of using this stud kit, and as always, we used only the beast pieces for this kit.
Kit mounts one stock or aftermarket oil pan
15 - Threaded Studs
15 - Washers, HD
15 - Flange
Nuts
|
|
|
2-Valve, Bell Housing Stud Kit
Threaded
Stud
|
|
2-Valve, Bell Housing Stud Kit
Wow, Tires of lying on your back trying to alien the Engine to the Transmission?
So is everyone else. Besides helping to protect the threads from wear and the very real chance of cross-threading, our
Bell Housing Threaded Stud kit is a life saver, and possibly a engine block saver as well.
Kit contains everything
for one engine
7 - Threaded Studs
7 - Washers, HD
7 - Flanged Nuts
|
|
|
2-Valve, Rear Main Seal Plate Kit
Threaded Stud
|
|
2-Valve, Rear main Seal Plate
Don't take a chance with your engine, use our Threaded Stud kit on all your engines available threaded holes, and protect
against striped threads, worn threads or cross-threads. This kit mounts the Rear main Seal Plate to the rear most section
of the Engine Block.
Kit mounts one Rear Seal Plate
5 - Threaded Studs
5 - Washers, HD
5 -
Flange Nuts
|
|
|
2-Valve, Exhaust manifold Stud Kit
Threaded Stud
|
|
2-Valve, Exhaust Manifold Stud Kit
Our Threaded Stud kits can dramatically increase the speed and
ease of installing Headers and Exhaust manifolds, when available. Because of the harsh nature of the exhaust manifold,
the threaded holes that hold these Headers on can get severely damaged or striped by repeated use. Use our Studs and
save your Heads.
One Kit mounts one Header or Exhaust manifold
8 - Threaded Studs
8 - Washers,
HD
8 - Flanged Nuts
|
|
|
2-Valve
Engine Oil Cooler/Filter, Stud Kit
Threaded
Stud Kit
|
|
2-Valve Engine Oil Cooler/Filter Mount
Our oil Cooler/Filter assembly Mounting Kit uses the very best Threaded Studs
we can fine. This Stud Kit also works with all aftermarket Remote Filter mounts from Moroso, Canton and even our own
Dry Sump plate from Aviaid. When only the best will do, Call Pro Weld.
Mounts One Cooler/Filter Assembly
4 - Threaded Studs
4 - Washers, HD
4 - Flanged Nuts
|
|
|
3-Valve, Valve Cover Kit
Threaded
Stud
|
|
3-Valve, Valve Cover Kit
We use only the best Threaded
Studs we can fine, then combined that with the same Super Hard and Durable Washers we use in our Socket Head Kits, and throw
in the right amount of Flanged Nuts. This combo makes for a very strong and formidable fastener kit. Studs should
always be used when available and when the conditions allow.
This kit allows the installation of one Valve Cover. 10
- Threaded Studs 10 - Washers, HD 10 - Flanged Nuts
|
|
|
3-Valve, Front Engine (Timing) Cover
Threaded Stud
|
|
3-Valve, Front Engine (Timing) Cover
There isn't a better Threaded Stud Kit on the market, and Pro Weld has them. This kit
mounts the Front Engine (Timing) Cover to the engine. Threaded Studs save wear and tear on threaded holes,
especially when used in aluminum engine blocks. We used only the finest pieces in our kits, and this one
is no different. Kit does one complete front engine cover ? - Threaded
Studs ?
- Washers, HD ? - Flanged Nuts
|
|
|
3-Valve, Water Pump Kit
Threaded
Stud
|
|
3-Valve, Water Pump Kit
This kit mounts the Water Pump Securely to the front of the engine block. We only use the best Threaded Studs, Washers
and Flanged Nuts Available.
Kit mounts one Water Pump
4 - Threaded Studs
4 - Washers, HD
4 - Flanged Nuts
|
|
|
3-Valve, Oil Pan Stud Kit
Threaded Stud
|
|
3-Valve, Oil Pan Stud Kit
Our Oil Pan Threaded Stud Kit is just the ticket
for Racer. The Threaded Stud Kit allows multiple Oil Pan removals to inspect the lower end, without fear of wear on
the threaded holes in the engine. But, you also don't have to be a racer to figure out the benefit of using this
stud kit, and as always, we used only the beast pieces for this kit.
Kit mounts one stock or aftermarket oil pan
15 - Threaded Studs
15 - Washers, HD
15 - Flange Nuts
|
|
|
3-Valve, Bell Housing Stud Kit
Threaded Stud
|
|
3-Valve, Bell Housing Stud Kit
Wow, Tires of lying on your back trying to alien the Engine to the Transmission? So is everyone else. Besides
helping to protect the threads from wear and the very real chance of cross-threading, our Bell Housing Threaded Stud kit is
a life saver, and possibly a engine block saver as well.
Kit contains everything for one engine
7 -
Threaded Studs
7 - Washers, HD
7 - Flanged Nuts
|
|
|
3-Valve, Rear Main Seal Plate Kit
Threaded Stud
|
|
3-Valve, Rear main Seal Plate
Don't take a chance with your engine, use our Threaded Stud kit on all your engines available threaded holes, and protect
against striped threads, worn threads or cross-threads. This kit mounts the Rear main Seal Plate to the rear most section
of the Engine Block.
Kit mounts one Rear Seal Plate
5 - Threaded Studs
5 - Washers, HD
5 -
Flange Nuts
|
|
|
3-Valve, Exhaust manifold Stud Kit
Threaded Stud
|
|
3-Valve, Exhaust Manifold Stud Kit
Our Threaded Stud kits can dramatically increase
the speed and ease of installing Headers and Exhaust manifolds, when available. Because of the harsh nature of the exhaust
manifold, the threaded holes that hold these Headers on can get severely damaged or striped by repeated use. Use our
Studs and save your Heads.
One Kit mounts one Header or Exhaust manifold
8 - Threaded Studs
8 -
Washers, HD
8 - Flanged Nuts
|
|
|
3-Valve
Engine Oil Cooler/Filter, Stud Kit
Threaded
Stud Kit
|
|
3-Valve Engine Oil Cooler/Filter Mount
Our oil Cooler/Filter assembly Mounting Kit uses the very best Threaded Studs we can fine.
This Stud Kit also works with all aftermarket Remote Filter mounts from Moroso, Canton and even our own Dry Sump plate from
Aviaid. When only the best will do, Call Pro Weld.
Mounts One Cooler/Filter Assembly
4 - Threaded
Studs
4 - Washers, HD
4 - Flanged Nuts
|
|
|
4-Valve, Valve Cover Kit
Threaded
Stud
|
|
4-Valve,
Valve Cover Kit
We use only the best Threaded Studs we can fine, then
combined that with the same Super Hard and Durable Washers we use in our Socket Head Kits, and throw in the right amount of
Flanged Nuts. This combo makes for a very strong and formidable fastener kit. Studs should always be used when
available and when the conditions allow.
This kit allows the installation of one Valve Cover. 10
- Threaded Studs 10 - Washers, HD 10 - Flanged Nuts
|
|
|
4-Valve, Front Engine (Timing) Cover
Threaded Stud
|
|
4-Valve,
Front Engine (Timing) Cover
There isn't a better Threaded Stud Kit on the market, and Pro
Weld has them. This kit mounts the Front Engine (Timing) Cover to the engine. Threaded
Studs save wear and tear on threaded holes, especially when used in aluminum engine blocks. We used only
the finest pieces in our kits, and this one is no different. Kit does one
complete front engine cover 15 - Threaded Studs 15 - Washers, HD 15 - Flanged Nuts
|
|
|
4-Valve, Water Pump Kit
Threaded
Stud
|
|
4-Valve, Water Pump Kit
This kit mounts the Water Pump Securely to the front of the engine block. We only use the best Threaded Studs, Washers
and Flanged Nuts Available.
Kit mounts one Water Pump
4 - Threaded Studs
4 - Washers, HD
4 - Flanged Nuts
|
|
|
4-Valve, Oil Pan Stud Kit
Threaded Stud
|
|
4-Valve, Oil Pan Stud Kit
Our Oil Pan Threaded Stud Kit is just the ticket
for Racer. The Threaded Stud Kit allows multiple Oil Pan removals to inspect the lower end, without fear of wear on
the threaded holes in the engine. But, you also don't have to be a racer to figure out the benefit of using this
stud kit, and as always, we used only the beast pieces for this kit.
Kit mounts one stock or aftermarket oil pan
15 - Threaded Studs
15 - Washers, HD
15 - Flange Nuts
|
|
|
4-Valve, Bell Housing Stud Kit
Threaded Stud
|
|
4-Valve, Bell Housing Stud Kit
Wow, Tires of lying on your back trying to alien the Engine to the Transmission? So is everyone else. Besides
helping to protect the threads from wear and the very real chance of cross-threading, our Bell Housing Threaded Stud kit is
a life saver, and possibly a engine block saver as well.
Kit contains everything for one engine
7 -
Threaded Studs
7 - Washers, HD
7 - Flanged Nuts
|
|
|
4-Valve, Rear Main Seal Plate Kit
Threaded Stud
|
|
4-Valve, Rear main Seal Plate
Don't take a chance with your engine, use our Threaded Stud kit on all your engines available threaded holes, and protect
against striped threads, worn threads or cross-threads. This kit mounts the Rear main Seal Plate to the rear most section
of the Engine Block.
Kit mounts one Rear Seal Plate
5 - Threaded Studs
5 - Washers, HD
5 -
Flange Nuts
|
|
|
4-Valve, Exhaust manifold Stud Kit
Threaded Stud
|
|
4-Valve, Exhaust Manifold Stud Kit
Our Threaded Stud kits can dramatically increase
the speed and ease of installing Headers and Exhaust manifolds, when available. Because of the harsh nature of the exhaust
manifold, the threaded holes that hold these Headers on can get severely damaged or striped by repeated use. Use our
Studs and save your Heads.
One Kit mounts one Header or Exhaust manifold
8 - Threaded Studs
8 -
Washers, HD
8 - Flanged Nuts
|
|
|
Lower Intake Manifold to Blower Base, Stud Kit
Threaded Stud Kit
|
|
|
|
|
Engine Oil Cooler/Filter, Stud Kit
Threaded Stud Kit
|
|
4-Valve
Engine Oil Cooler/Filter Mount
Our oil Cooler/Filter assembly
Mounting Kit uses the very best Threaded Studs we can fine. This Stud Kit also works with all aftermarket Remote Filter
mounts from Moroso, Canton and even our own Dry Sump plate from Aviaid. When only the best will do, Call Pro Weld.
Mounts One Cooler/Filter Assembly
4 - Threaded Studs
4 - Washers, HD
4 - Flanged Nuts
|
|
|
Water Pump, Drive Hub, Stud
Mounting Kit
TS-010
|
|
Water Pump, Drive Hub, Stud Mounting Kit
We use this kit to mount the Drive Hub/Pulley to the Water Pump. You can combine
this kit with the Water Pump Mounting Kit, to make a bullet proof Water Pump Assembly.
Works for all 2-Valve, 3-Valve and 4-Valve engines.
4 - Threaded Mtric Studs
4 - Washers, HD
4 - Flanged
Nuts
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
