99-01 Cobra Bolt Kits
Front Timing Cover Bolt Kit
Options
Description: Bolts the front timing cover to the front of the block.
Item #: MODSH0304CFCBK
Front Timing Cover Threaded Stud Kit
Options
Description:Mounts front timing cover to front of engine block.
Item #: MODSTUD9698CFTC10.9
Idle Air Control Valve Bolt Kit
Options
Description: The idle air control valve is located on the front/side of the throttle body. This kit mounts that valve.
Item #: MODSH0304CIACVK
Idle Air Control Valve Stud Kit
Options
Description: The idle air control valve is located on the front/side of the throttle body. This kit mounts that valve.
Item #: MODSH0STUDIACVK10.9
Upper Intake Manifold Bolt Kit
Options
Description: Mounts the upper intake manifold to the lower manifold with both bolt or threaded stud kits.
Item #: MODSH9901CUIMK
Upper Intake Manifold W/ Spacer Bolt Kit
Options
Description: This kit mounts the upper intake manifold to the lower, when used with a 1/2" plentum spacer. The increased plentum volume increases performance.
Item #: MODSH9901CUIMWSBK
Cobra Upper Intake Manifold Stud Kit
Options
Description: Upper intake stud kit if manifold has center bolt, there will be a bollt there not a stud.
Item #: MODSTUDCUIMK10.9
Lower Intake Manifold Bolt Kit
Options
Description: Mounts the lower intake manifold to the cylinder heads with bolts.
Item #: MODSH9901CLIMHK
Manifold To Head Threaded Stud Kit
Options
Description: This threaded stud kit does the same as above, only without the socket head bolts, and with threaded studs instead.
Item #: MODSTUD0304CBLIMK10.9
Exhaust Manifold Bolt Kit *add highlighted 2 kits per engine*
Options
Description: Mounts exhaust manifold or header to heads.
Item #: MODSHALLEMBKBO
Exhaust Manifold Threaded Stud Kit *add highlighted 2 kits per engine*
Options
Description: Mounts exhaust manifold or header to heads.
Item #: MODSTUDALLSSTUD
Throttle Body Bolt Kit
Options
Description: Mounts throttle body to intake.
Item #: MODSH99-04CTBK
Throttle Body Threaded Stud Kit
Options
Description: Same as above, only here we use threaded studs to fasten the throttle body.
Item #: MODSTUDTBIMR10.9
Fuel Rail Mounting Bolt Kit
Options
Description: Mounts fuel rail to intake manifold.
Item #: MODSH99-04CFRM
Electronic Vacuum Regulator Mounting Bolt Kit
Options
Description: Mounts the electronic vacuum regulator to the manifold.
Item #: MODSH99-04CEVRM
Engine Coolant Cross-Over Tube Bolt Kit
Options
Description: The engine coolant cross-over tube, mounts between the two heads and transports the hot coolant out toward the radiator. This kit mounts that tube.
Item #: MODSH0304CECCOTK
Thermostat Housing Bolt Kit
Options
Description: The thermostat is located in a 2 piece housing. This kit fastens that housing together.
Item #: MODSH0304CTHBK
EGR Valve Bolt Kit
Options
Description: Fastens the exhaust gas recirculation valve to the intake manifold. Also works with EGR block-off plates too.
Item #: MODSH0304CEGRVK
EGR Valve Stud Kit
Options
Description: Fastens the exhaust gas recirculation valve to the intake manifold with studs.
Item #: MODSHSTUDEGRVK10.9
Cylinder Head Temperature Sensor Bolt Kit
Options
Description: Mounts cylinder head temperature sensor.
Item #: MODSHMACH1CHTSBK
Throttle Cable Mounting Bolt Kit
Options
Description: Mounts the throttle cable bracket to the top of the intake manifold.
Item #: MODSH99-04CTCMK
Throttle Cable Mounting Stud Kit
Options
Description: Mounts the throttle cable bracket to the top of the intake manifold with studs.
Item #: MODSH99-04CTCMK
Throttle Position Sensor Bolt Kit
Options
Description: Mounts the throttle position sensor (TPS) to the throttle body or intake.
Item #: MODSHALLTPSBK
4 Valve Alternator Mounting Bolt Kit
Options
Description: Mounts alternator to front of engine center, above water pump.
Item #: MODSH99-04CAMB
4 Valve Alternator Top Mounting Brace Bolt Kit
Options
Description: The alternator top brace secures the alternator top by bracing it with a steel bracket.
Item #: MODSH99-04CATB
4 Valve Alternator Top Mounting Brace Stud Kit
Options
Description: The alternator top brace secures the alternator top by bracing it with a steel bracket using studs.
Item #: MODSTUDATB10.9
Idler Pulley Bolt Kit
Options
Description: Mounts idler pullies to front drive.
Most applications use more than one
Most applications use more than one
Item #: MODSHALLIPMK
Idler Pulley W/ Anodized Washer Bolt Kit
Options
Description: Mounts idler pulley to front drive, plus adds the color and style of an anodized aluminum washer.
Most applications use more than one
Most applications use more than one
Item #: MODSHALLIP/AWMK
Idler Pulley Stud Kit
Options
Description: Mounts idler pulley with studs.
Most applications use more than one
Most applications use more than one
Item #: MODSTUDALLIPMSKARP
Idler Pulley Stud Kit W/ Anodized Washer
Options
Description: Mounts idler pulley with studs w/ aluminum washer.
Most applications use more than one
Most applications use more than one
Item #: MODSTUDALLIPMSK
Crankshaft Sensor Mounting Bolt Kit
Options
Description: Mount cam sensor to the front cover.
Item #: MODSHALLCRKSMK
Crankshaft Sensor Mounting Stud Kit
Options
Description: Mount cam sensor to the front cover with studs.
Item #: MODSTUDCRSMK10.9
Camshaft Sensor Mounting Bolt Kit
Options
Description: Mounts cam sensor to the front cover.
Item #: MODSHALLCAMSMK
Camshaft Sensor Mounting Stud Kit
Options
Description: Mounts cam sensor to the front cover with studs.
Item #: MODSTUDCRSMK10.9
Mach 1 Valve Cover Mounting Bolt Kit
Options
Description: Cobra modular engines have large, beautiful valve covers. This kit is what fastens them to the head with bolts
It takes two (2) kits per engine
It takes two (2) kits per engine
Item #: MODSH0304CCVCBK
Mach 1 Valve Cover Mounting Stud Kit
Options
Description: Just like the above kit but this one uses threaded studs to fasten the valve cover in place.
It takes two (2) kits per engine
It takes two (2) kits per engine
Item #: MODSTUDCVCBK10.9
Valve Cover W/ Anodized Washer Mounting Bolt Kit
Options
Description: Here we use the bolt kit to fasten the valve cover down, only this kit will also incorporate the anodized washers in it. The washers act as accents and provide a nice color combo theme.
It takes two (2) kits
It takes two (2) kits
Item #: MODSH0304CCVCBKW/AW
Mach 1 Coil Cover Mounting Kit
Options
Description: The coil covers sit above the valve cover and are used to cover/protect the ignition coil packs. This kit mounts those covers.
It takes two (2) kits per engine
It takes two (2) kits per engine
Item #: MODSH0304CCCBK
Coil Cover Threaded Stud Mounting Kit
Options
Description: As above only here we use threaded studs to mount the coil covers.
It takes two (2) kits
It takes two (2) kits
Item #: MODSTUDCCBK10.9
Coil Cover W/ Anodized Washer Mounting Bolt Kit
Options
Description: This coil cover bolt kit is like above, only it also has anodized washers in it.
It takes two (2) kits
It takes two (2) kits
Item #: MODSH0304CCCBKW/AW
Engine Oil Cooler/ Filter Mounting Bolt Kit
Options
Description: Mounts engine oil cooler/ filter to side of engine.
Item #: MODSHALLEOCFMK
Engine Oil Cooler/ Filter Mounting Stud Kit
Options
Description: Mounts engine oil cooler/ filter to side of engine with studs.
Item #: MODSTUDALLEOCFMKARP
Timing Chain Tensioner Bolt Kit (Long) Crank To Cam Chain Right Passenger Side
Options
Description: Mounts long timing chain to right passenger side of engine.
Item #: MODSHALLLCCRST
Timing Chain Tensioner Bolt Kit (Long) Crank To Cam Chain Left Driver Side
Options
Description: Mounts long timing chain to left drivers side of engine.
Item #: MODSHALLLCCLST
Timing Chain Tensioner Pivot Right Passenger Bolt Kit
Options
Description: Mounts timing chain guide/pivot to right pssenger side.
Item #: MODSHALLCCTBP
Timing Chain Tensioner Guide Left Driver Bolt Kit
Options
Description: Mounts timing chain guide/pivot to left driver side.
Item #: MODSHALLCCTBP
Timing Chain Guide Bolt Kit (Longchain) Right Passenger Side
Options
Description: Timing chain guide bolt kit long chain, right passenger side.
Item #: MODSHALLTCGRS
Timing Chain Guide Bolt Kit (Longchain) Left Driver Side
Options
Description: Timing chain guide bolt kit long chain, left driver side.
Item #: MODSHALLTCGLS
Timing Chain Tensioner Bolt Kit (Short Cam Chain) Right Passenger Side
Options
Description: Short timing chain tensioner bolt kit, right passenger side.
Item #: MODSHALLSRSCT
Timing Chain Tensioner Bolt Kit (Short Cam Chain) Left Driver Side
Options
Description: Timing chain Tensioner, short, left driver side.
Item #: MODSHALLSLSCT
Motor Mount Center Nut Kit
Options
Description: Large center nut that mounts motor mount to k-member.
Item #: MODSHALLmCSNK
Motor Mount Case Half Bolt Kit
Options
Description: Holds the motor mounts case halfs together.
Item #: MODSHALLmCH
Motor Mount Bolt Kit
Options
Description: Mounts motor mount to side of block.
Item #: MODSHALLmBK
Starter Motor Bolt Kit
Options
Description: Mounts starter motor to bottom right side passenger of engine bottom.
Item #: MODSHALLSMBK
Starter Motor Threaded Stud Kit
Options
Description: Mounts starter motor to bottom right side passenger of engine bottom with studs.
Item #: MODSTUDALLSMSK
Starter Motor Power Connection Nut Kit
Options
Description: Mounts power lead to starter.
Item #: MODNUTALLSMPLN
Starter Motor Case Bolt Kit
Options
Description: Holds starter motor together.
Item #: MODSHALLSMCBKBO
Starter Motor Solenoid Mount Kit
Options
Description: Mounts the starter motor solenoid.
Item #: MODSHALLSMSBK
Bellhousing Bolt Kit
Options
Description: Mounts the transmission to the engine block.
Item #: MODSHALLBHBK
Bellhousing Threaded Stud Kit
Options
Description: Mounts the transmission to the engine block with studs.
Item #: MODSTUDALLBHSKARP
Engine Stand Bolt Kit
Options
Description: Mounts engine to standard engine stand.
Item #: MODSHALLESBK
Passenger Side Dry Sump Mounting Plate Bolt Kit
Options
Description: Mounts our dry sump oil pump where the AC compressor normally mounts.
Item #: MODSHALLDSPPK
Drivers Side Dry Sump Mounting Plate Bolt Kit
Options
Description: Mounts our dry sump oil pump where the oil cooler normally mounts.
Item #: MODSHALLDSDPPK
4V Cam Bearing Cap Bolt Kit
Options
Description: Mounts the cam shaft caps to the 4V heads.
2 kits needed per engine
2 kits needed per engine
Item #: MODSH4V9904CBCBK
ARP Cam Tower Bolt Kits
Options
Description: Complete kit for both heads.
Item #: 156-100
Engine Block Main, Side Bolt Kit, Iron
Options
Description: Iron blocks.
Item #: MODSHIRONSBK001
Engine Main Side Bolt Kit, Aluminum
Options
Description: Teksid, WAP, NVH
Item #: MODSHTEKSID001
Idler Pulley Bolt Kit
Options
Description: Mounts idler pullies to front drive.
Most applications use more than one
Most applications use more than one
Item #: MODSHALLIPMK
Idler Pulley W/ Anodized Washer Bolt Kit
Options
Description: Mounts idler pulley to front drive, plus adds the color and style of an anodized aluminum washer.
Most applications use more than one
Most applications use more than one
Item #: MODSHALLIP/AWMK
Idler Pulley Stud Kit
Options
Description: Mounts idler pulley with studs.
Most applications use more than one
Most applications use more than one
Item #: MODSTUDALLIPMSKARP
Idler Pulley Stud Kit W/ Anodized Washer
Options
Description: Mounts idler pulley with studs w/ aluminum washer.
Most applications use more than one
Most applications use more than one
Item #: MODSTUDALLIPMSK
Back To Top