03-04 Cobra Bolt Kits
Front Timing Cover Bolt Kit
Options
Description: Bolts the Front Timing Cover to the front of the Block.
Item #: MODSH0304CFCBKBO
Front Timing Cover Stud Kit
Options
Description: Mounts Front Timing Cover to front of engine block
Item #: MODSTUD9698CFTC10.9
Alternator Mounting Bracket Kit
Options
Description: This Kit mounts the Alternator
Mounting Bracket to the side of the engine. The Alternator mounts to this
Item #: MODSH0304CABKBO
Alternator Mounting Kit
Options
Description: The kit Mounts the Alternator
to the mounting bracket in the
above kit
Item #: MODSH0304CAMKBO
Top Alternator Bracket Kit
Options
Description: The Top Alternator Bracket, is
located above the water pump,
and below the SC drive pulley.
This kit mounts that part.
Item #: MODSH0304CTABKBO
Top Alternator Bracket Idler W/ Anodized Washers
Options
Description: This kit mounts the Idler Pulley with an Anodized washers
Item #: MODSH0304CTABBO
Lower Alternator Bracket Kit
Options
Description: Fastens the Lower Alternator
Bracket to the front of the engine.
Item #: MODSH0304CLABKBO
Lower Alternator Bracket Kit W/ Anodized Washers
Options
Description: Same as the Above Kit, just includes the Anodized Washers.
Item #: MODSH0304CLABKW/AWBO
Lower Crank Support Kit
Options
Description: The kit fastens the Crankshaft Front
Support Bracket to the front engine cover.
It supports the crank from flexing.
Item #: MODSH0304CLCSKBO
Lower Crank Support, Idler Pulley W/ Anodized Washer Kit
Options
Description: This is a Anodized Washer Kit, for the Idler Pulley on the Lower Crank Support Bracket.
Item #: MODSH0304CLCSKW/AWBO
Pulley Bridge Bolt Kit
Options
Description: The Pulley Bridge, spans the front of the
engine and provides the support for the
Supercharger Drive System.
Item #: MODSH0304CPBBKBO
Idler Pulley Bolt Kit
Options
Description: Mounts Idler Pullies to Front Drive
Most applications use more than one
Most applications use more than one
Item #: MODSHALLIPMKBO
Idler Pulley W/ Anodized Washer Bolt Kit
Options
Description: Mounts Idler Pulley to front Drive, Plus
adds the color and style of a Anodized
Aluminum Washer.
Most applications use more than one
Most applications use more than one
Item #: MODSHALLIP/AWMKBO
Idler Pulley Stud Kit
Options
Description: Mounts Idler Pulley With Studs.
Most applications use more than one
Most applications use more than one
Item #: MODSTUDALLIPMSKARP300
Idler Pulley Stud Kit W/ Anodized Washer Kit
Options
Description: Mounts Idler Pulley With Studs With Aluminum Washers.
Most applications use more than one
Most applications use more than one
Item #: MODSTUDALLIPMSKARP300W/AW
Lower Intake Manifold Bolt Kit
Options
Description: Here we have the kit that mounts the
Lower Intake manifold to the Heads.
Item #: MODSH0304CBLIMKBO
Lower Intake Manifold to Head Threaded Stud Kit
Options
Description: This Threaded Stud Kit does the same as
above, only without the Socket Head
Bolts, and with Threaded Studs
Item #: MODSTUD0304CBLIMK10.9
Blower to Lower Intake Manifold Bolt Kit
Options
Description: The Blower Bolt Kit, mounts the Blower
to the Upper Intake Manifold.
Item #: MODSH0304CBLIMKBO
Blower to Lower Intake Manifold Threaded Stud Kit
Options
Description: Same as above only we use Threaded
Studs to mount the Blower.
Item #: MODSTUD0304CBLIMKARP300
Blower Bottom to Intercooler Kit
Options
Description: On this engine, the Inter-Cooler for the
Intake Air Supply is located on the bottom
of the Supercharger, this kit mounts
that Inter-Cooler.
Item #: MODSH0304CBBICKBO
Blower Bottom to Intercooler Kit, XL (oversized)
Options
Description: Standard thread size for this kit is M5.
Unfortunately, many times these bolts
break or strip-out, causing us to re-thread
them to M6, this kit is the larger thread size.
Item #: MODSH0304CBBICKXLBO
Intercooler Manifold Bolt Kit
Options
Description: The Inter-Cooler manifold is located under
the Blower Pulley, on the front of the engine.
This mounts that part to the Lower
Intake Manifold
Item #: MODSH0304CICMKBO
Intercooler Manifold Threaded Stud Kit
Options
Description: Same as above kit, but uses Threaded Studs
instead of Bolts.
Item #: MODSTUD0304CICMK10.9
Blower Snout Bolt Kit
Options
Description: The Blower Snout is the long rigid
housing that holds and supports the
Supercharger. This kit attaches it to
the SC Housing.
Item #: MODSH0304CBSBKBO
Intake Manifold Runner to Blower Bolt Kit
Options
Description: The Intake Manifold Runner is the large
part between the Blower Housing and the
Throttle Body. This kit attaches it to
to the Blower Body.
Item #: MODSHALLEMBKBO
Intake Manifold Runner to Blower Threaded Stud Kit
Options
Description: As above, only here we use Threaded
Studs for the fastener
Item #: MODSTUD0304CIMRBKARP300
Fuel Rail / Manifold Bolt Kit
Options
Description: Mounts the Fuel Rail to the Intake
Manifold sides
Item #: MODSH0304CFRBKBO
Throttle Body to Intake Manifold Runner Bolt Kit
Options
Description: This Kit fastens the Throttle Body to the
Intake Manifold Runner
Item #: MODSH0304CTBIMRBO
Throttle Body to Intake Manifold Runner Threaded Stud Kit
Options
Description: Same as above, only here we use Threaded
Studs to fasten the Throttle Body to the
Intake Manifold Runner.
Item #: MODSTUDTBIMR10.9
Vacuum Accessory Bracket Bolt Kit
Options
Description: The Accessory Bracket bolt to the Drivers
Side of the Blower, this kit attaches it.
Item #: MODSH0304CVABBKBO
Throttle Cable Mounting Bracket Bolt Kit
Options
Description: The Throttle Cable Mounting Bracket is
located on the Top/Back side of the Blower.
This kit fastens that bracket in place.
Item #: MODSH0304CTCMBKBO
Throttle Cable Mounting Bracket Stud Kit
Options
Description: The Throttle Cable Mounting Bracket is
located on the Top/Back side of the Blower.
This kit fastens that bracket in place with studs..
Item #: MODSTUDTCMK10.9
Solenoid By-Pass Valve Mounting Kit
Options
Description: Fastens the Solenoid By-Pass Valve to the
Drivers Side/Middle of the Blower.
Item #: MODSH0304CSBPVKBO
Supercharger Drive Belt Guard Mounting Kit
Options
Description: The Supercharger Drive Belt Guard is a
Safety Issue, and is mounted on the front of
the engine to cover the drive belt.
This kit mounts that item.
Item #: ODSH0304CSCDBGKBO
Cobra Valve Cover Mounting Bolt Kit
Options
Description: Cobra Modular Engines have large,
Beautiful Valve Covers…This kit is what
fastens them to the head with Bolts.
It takes two (2) kits.
It takes two (2) kits.
Item #: MODSH0304CCVCBKBO
Cobra Valve Cover Threaded Stud Mounting Kit
Options
Description: Just like the Above Kit, only this one uses Threaded Studs to fasten the Valve Cover in place.
It takes two (2) kits.
It takes two (2) kits.
Item #: MODSTUDCVCBK10.9
Cobra Valve Cover Mounting Bolt Kit W/ Anodized Washers
Options
Description: Here we use the Bolt Kit to fasten the Valve
Cover down, only this kit will also
incorporate the Anodized Washers in it.
The Washers act as accents, and along
with themselves, they look very nice and
provide a nice color combo theme.
It takes two (2) kits.
It takes two (2) kits.
Item #: MODSH0304CCVCBKW/AWBO
Coil Cover Bolt Mounting Kit
Options
Description: The Coil Covers sit above the Valve Cover,
, and are used to cover/protect the Ignition
Coil Packs. This kit mounts those Covers.
It takes two (2) kits.
It takes two (2) kits.
Item #: MODSH0304CCCBKBO
Coil Cover Threaded Stud Mounting Kit
Options
Description: As above, only here we use Threaded Studs
to mount the Coil Covers.
Item #: MODSTUDCCBK10.9
Coil Cover Bolt Mounting Kit W/ Anodized Washers
Options
Description: This Coil Cover Bolt Kit is like above, only
it also has Anodized Washers in it.
It takes two (2) kits.
It takes two (2) kits.
Item #: MODSH0304CCCBKW/AWBO
Engine Coolant Cross-Over Tube Bolt Kit
Options
Description: The Engine Coolant Cross-Over Tube, mounts
between the two Heads and transports the
hot coolant out toward the Radiator.
This kit mounts that Tube.
Item #: MODSH0304CECCOTKBO
Thermostat Housing Bolt Kit
Options
Description: The Thermostat is located in a 2-piece
housing. This kit fastens that housing together.
Item #: MODSH0304CTHBKBO
EGR Valve Bolt Kit
Options
Description: Fastens the Exhaust Gas Recirculation
Valve to the Intake Manifold....also works
with EGR Block-Off Plates too.
Item #: MODSH0304CEGRVKBO
EGR Valve Stud Kit
Options
Description: Fastens the Exhaust Gas Recirculation
Valve to the Intake Manifold with studs....also works
with EGR Block-Off Plates too.
Item #: MODSHSTUDEGRVK10.9
Idle Air Control Valve Bolt Kit
Options
Description: The Idle Air Control Valve is located on the
front/Side of the Throttle Body. This kit Mounts that valve.
Item #: MODSH0304CIACVKBO
Idle Air Control Valve Stud Kit
Options
Description: The Idle Air Control Valve is located on the
front/Side of the Throttle Body. This kit
Mounts that valve with studs.
Item #: MODSH0STUDIACVK10.9
Engine Oil Cooler/Filter Mounting Bolt Kit
Options
Description: The Oil Filter/Cooler Mount is located on
the Driver Side/lower end of the engine.
This kit mounts that part.
Item #: MODSH0304COCFMKBO
Engine Oil Cooler/Filter Mounting Stud Kit
Options
Description: As above, only this kit uses Threaded Studs
to mount the Oil Filter/Cooler mount.
Item #: MODSTUDALLEOCFMKARP300
MAP/IAT Sensor Bolt Kit
Options
Description: The Map/IAT Sensor stands for Manifold
Absolute Pressure/Intake Air temperature.
It measures the Air Pressure or Boost
Pressure in the Manifold and also the
temperature of that air. The ECM uses this
information to adjust both fuel and timing
to account for the readings.
Item #: MODSH03-04CMAPBKBO
6G Alternator Case Side Bolt Kit
Options
Description: Holds the Alternator Case halves together
on the 6G Alternator.
The 6G is the Alternator used on most all
99-2004 Mustang GT's.
03-04 Cobra
Item #: MODSHALL6GACSBKBO
4G Alternator Case Side Bolt Kit
Options
Description: This kit is for the 4G Alternator, and it
holds the two (2) case haves together.
The 4G Alternators were were used in
many modles, and is notable in that it uses
much smaller (length) case side bolts then
then others. Some Applications include,
Bullit, Mach 1, 99-01 & 96-98 Cobra .
Item #: MODSHALL4GACSBKBO
3G Alternator Case Side Bolt Kit
Options
Description: This Bolt Kit is for the 3G Alternators.
Ford used this style Alternator on many
early push-rod engines, as well as other
models. This unit has the long side case
bolt like the 6G, and was used on the
96-98 Mustang GT, and most Modular
Mustang GT, and most Modular trucks and SUV's.
Item #: MODSHALL3GACSBKBO
Crankshaft Sensor Mounting Bolt Kit
Options
Description: Mount Cam sensor to the Front
Cover
Item #: MODSHALLCRKSMKBO
Crankshaft Sensor Mounting Stud Kit
Options
Description: Mount Cam sensor to the Front Cover with studs.
Item #: MODSTUDCRSMK10.9
Camshaft Sensor Mounting Bolt Kit
Options
Description: Mounts Cam Sensor to the
Front Cover
Item #: MODSHALLCAMSMKBO
Camshaft Sensor Mounting Stud Kit
Options
Description: Mounts Cam Sensor to the
Front Cover
Item #: MODSTUDCAMSMK10.9
Alternator Voltage Regulator Bolt Kit
Options
Description: Mounts Voltage Regulator to
Back of Alternator
Item #: MODSH3GRB003BO
Alternator Brush Holder Screw Kit
Options
Description: Holds brush cover in place
Item #: DSH3GBH003BO
Alternator Power Connections Nut Kit
Options
Description: secures the Power Lead to the Alternator
Item #: MODSHALLPS001Steel
Engine Oil Cooler/Filter Mounting Bolt Kit
Options
Description: Mounts Engine Oil Cooler/
Filter to side of Engine
Item #: MODSHALLEOCFMKBO
Engine Oil Cooler/Filter Mounting Stud Kit
Options
Description: Mounts Engine Oil Cooler/
Filter to side of Engine with Studsolts the Front Timing Cover to the front of the Block.
Item #: MODSTUDALLEOCFMKARP300
Timing Chain Tensioner Bolt Kit (Long) Crank to Cam Chain, Right Side, Passenger
Options
Description: Mounts Long Timing Chain
RS,Pass side of engine
Item #: MODSHALLLCCRSTBO
Timing Chain Tensioner Bolt Kit (Long) Crank to Cam Chain, Left Side, Driver
Options
Description: Mounts Long Timing Chain
LS,Drivers side of engine
Item #: MODSHALLLCCLSTBO
Timing Chain Tensioner Pivot Bolt Kit, Right Side, Passenger
Options
Description: Mounts Timing Chain Guide/Pivot
to RS Pass Side
Item #: ODSHALLCCTBPBO
Timing Chain Tensioner Guide Bolt Kit, Left Side, Driver
Options
Description: Mounts Timing Chain Guide/Pivot
to LS Driver Side
Item #: MODSHALLCCTBPBO
Timing Chain Guide Bolt Kit (Longchain), Right Side, Passenger
Options
Description: Timing Chain Guide Bolt Kit
Long Chain, RS Passenger
Item #: MODSHALLTCGRSBO
Timing Chain Guide Bolt Kit (Longchain), Left Side, Driver
Options
Description: Timing Chain Guide Bolt Kit
Long Chain, LS Drivers
Item #: MODSHALLTCGLSBO
Timing Chain Tensioner Bolt Kit (Short Cam Chain), Right Side, Passenger
Options
Description: Short Timing Chain Tensioner
Bolt kit, RS passenger
Item #: MODSHALLSRSCTBO
Timing Chain Tensioner Bolt Kit (Short Cam Chain), Left Side, Driver
Options
Description: Timig Chain Tensioner, Short,
LS Drivers Side
Item #: MODSHALLSLSCTBO
Motor Mount Center Nut Kit
Options
Description: Large Center Nut that mounts
Motor mount to K-Member
Item #: MODSHALLMMCSNKBO
Motor Mount Case Half Bolt Kit
Options
Description: Holds the Motor mounts case
halfs together
Item #: MODSHALLMMCHBO
Motor Mount Bolt Kit
Options
Description: Mounts Motor Mount to
side of Block
Item #: MODSHALLMMBKBO
Starter Motor Bolt Kit
Options
Description: Mounts Starter Motor to
bottom RS passenger side of
engine bottom
Item #: MODSHALLSMBKBO
Starter Motor Threaded Stud Kit
Options
Description: Mounts Starter Motor to
bottom RS passenger side of
engine bottom with studs
Item #: MODSTUDALLSMSKARP300
Starter Motor Power Connection Nut Kit
Options
Description: Mounts Power lead to Starter
Item #: MODNUTALLSMPLN
Starter Motor Case Bolt Kit
Options
Description: Holds Starter Motor together
Item #: MODSHALLSMCBKBO
Starter Motor Solenoid Mount Kit
Options
Description: Mounts the Starter Motor
Solenoid
Item #: ODSHALLSMSBKBO
Bellhousing Bolt Kit
Options
Description: Mounts the Transmission to
the engine block
Item #: MODSHALLBHBKBO
Bellhousing Threaded Stud Kit
Options
Description: Mounts the Transmission to the engine block with studs.
Item #: MODSTUDALLBHSKARP300
Engine Stand Bolt Kit
Options
Description: Mounts engine to standard
engine stand
Item #: MODSHALLESBKBO
Dry Sump Mounting Plate Bolt Kit, Passenger Side
Options
Description: Mounts our Dry Sump Oil Pump where the Ac Compressor normally mounts.
Item #: ODSHALLDSPPKBO
Dry Sump Mounting Plate Bolt Kit, Driver Side
Options
Description: Mounts our Dry Sump Oil Pump where the Oil Cooler normally mounts.
Item #: MODSHALLDSDSPPKBO
Cam Bearing Cap Bolt Kit
Options
Description: Mounts the cam shaft caps to the 4-valve heads.
2 Kits needed per engine
2 Kits needed per engine
Item #: MODSH4V9904CBCBKBO
ARP Cam Tower Bolt Kits
Options
Description: Complete kit for both heads.
Item #: 156-100
Engine Main Side Bolt Kit (Iron Blocks)
Options
Description: Iron blocks.
Item #: MODSHIRONSBK001
Engine Main Side Bolt Kit (Aluminum Blocks)
Options
Description: Teksid, WAP, NVH
Item #: MODSHTEKSID001
Idler Pulley Bolt Kit
Options
Description: Mounts Idler Pulley to front drive.
Most applications use more than one
Most applications use more than one
Item #: MODSHALLIPMKBO
Idler Pulley Bolt Kit W/ Anodized Washers
Options
Description: Mounts Idler Pulley to front drive with Aluminum Washers.
Most applications use more than one
Most applications use more than one
Item #: MODSHALLIP/AWMKBO
Idler Pulley Stud Kit
Options
Description: Mounts Idler Pulley With Studs
Most applications use more than one
Most applications use more than one
Item #: MODSTUDALLIPMSKARP300
Idler Pulley Stud Kit W/ Anodized Washers
Options
Description: Mounts Idler Pulley With Studs With Aluminum Washers.
Most applications use more than one
Most applications use more than one
Item #: MODSTUDALLIPMSKARP300W/AW
Back To Top