Checkout

Credit Card Icons

3 Valve Bolt Kits

Front Timing Case Bolt Kit

Bolt Type
Description: Mounts Engine Timing Cover to front of engine with Bolt or Threaded Stud Kits
Item #: MODSH3VFTCBK

Front Timing Case Threaded Stud Kit

Bolt Type
Description: Same as above, but this kit mounts the Front Timing Cover with Threaded Studs.
Item #: MODSTUD3VFTCKarp0.9

Valve Cover Bolt Kit

Options
Description: Mounts the valve cover to the top of the cylinder head. Our kit re-uses the OEM valve cover seals, just knock out the old screws and install your new bolts

It takes two (2) kits per engine
Item #: MODSH3VVCBK

Valve Cover Threaded Stud Kit

Options
Description: Uses studs to mount the valve cover.
Item #: MODSTUD3VVCBKarp0.9

Throttle Body To Intake Manifold Bolt Kit

Options
Description: Mounts the throttle body to the intake manifold.
Item #: MODSH3VTBIMBK

Throttle Body To Intake Manifold Threaded Stud Kit

Options
Description: Mounts throttle body with studs.
Item #: MODSTUD3VTBIMBKarp0.9

Intake Manifold To Head Bolt Kit

Options
Description: Mounts the intake manifold
Item #: MODSH3VIMHBK

Intake Manifold Runner Bellows Mount

Options
Description: The 3V engine uses the IMRC or intake manifold runner conrol to vary the intake runner length on the engine.
Item #: MODSH3VIMRBMK

Ignition Coil Mounting Bolt Kit

Options
Description: The 3V engine uses a coil on plug ignition system. These coils are located at the top of each cylinder and are held in place with a mounting bolt. This kit replaces those OEM bolts.
Item #: MODSH3VCMBK

Alternator Mounting Bolt Kit

Options
Description: The alternator mounting kit mounts the alternator to the front of the engine block.
Item #: MODSH3VAMBK

Alternator Top Brace Bolt Kit

Options
Description: The alternator brace is located at the rear/top of the alternator. The brace supports and stiffens the alternator on the engine. This kit supplies those bolts needed for this brace.
Item #: MODSH3VATBBK

Engine Coolant Water Cross-Over Tube Bolt Kit

Options
Description: The water cross-over tube is located front/center on the intake manifold. It connects the 2 coolant returns into one and routs it to the radiator. This kit mounts that part.
Item #: MODSH3VECWCOTK

Cam Bearing Cap Bolt Kit

Options
Description: The cam mounting caps are the main parts that hold the camshaft in place. Located beneath the valve cover, these caps are extremely important and vital to engine function and health. Our kits offer a wide variety of performance bolts to hold these caps as firmly in place as possible

2 kits needed per engine
Item #: MODSH3VCBCBK

Cam Bearing Cap Threaded Stud Kit

Options
Description: Same as above, but with studs.

2 kits needed per engine
Item #: MODSTUD3VCBCBKarp0.9

Dip Stick Tube Kit

Options
Description: Mounts dip stick to head.
Item #: MODSHALLDSTK

Water Heater Connector Bolt Kit

Options
Description: Mounts water heater connector to head.
Item #: MODSHALLWHCBK

Water Heater Tube Bolt Kit

Options
Description: Mounts water heater tube to head.
Item #: MODSHALLWHTCK

Idler Pulley Bolt Kit

Options
Description: Mounts idler pullies to front drive.
Most applications use more than one.
Item #: MODSHALLIPMK

Idler Pulley Bolt Kit W/ Black Anodized Washer

Options
Description: Mounts idler pullies to front drive along with adding color and style with the anodized aluminum washers.
Most applications use more than one.
Item #: MODSHALLIP/AWMK

Idler Pulley Bolt Kit W/ Red Anodized Washer

Options
Description: Mounts idler pullies to front drive along with adding color and style with the anodized aluminum washers.
Most applications use more than one.
Item #: MODSHALLIP/AWMK

Idler Pulley Bolt Kit W/ Gold Anodized Washer

Options
Description: Mounts idler pullies to front drive along with adding color and style with the anodized aluminum washers.
Most applications use more than one.
Item #: MODSHALLIP/AWMK

Idler Pulley Bolt Kit W/ Blue Anodized Washer

Options
Description: Mounts idler pullies to front drive along with adding color and style with the anodized aluminum washers.
Most applications use more than one.
Item #: MODSHALLIP/AWMK

Idler Pulley Bolt Kit W/ Silver Anodized Washer

Options
Description: Mounts idler pullies to front drive along with adding color and style with the anodized aluminum washers.
Most applications use more than one.
Item #: MODSHALLIP/AWMK

Idler Pulley Bolt Kit W/ Natural (Unfinished) Anodized Washer

Options
Description: Mounts idler pulley with bolts.
Most applications use more than one.
Item #: MODSTUDALLIPMSK

Idler Pulley Stud Kit

Options
Description: Mounts idler pullies with studs.
Most applications use more than one.
Item #: MODSTUDALLIPMSKARP

Idler Pulley Stud Kit W/ Black Anodized Washer

Options
Description: Mounts idler pullies to front drive along with adding color and style with the anodized aluminum washers.
Most applications use more than one.
Item #: MODSHALLIP/AWMK

Idler Pulley Stud Kit W/ Red Anodized Washer

Options
Description: Mounts idler pullies to front drive along with adding color and style with the anodized aluminum washers.
Most applications use more than one.
Item #: MODSHALLIP/AWMK

Idler Pulley Stud Kit W/ Gold Anodized Washer

Options
Description: Mounts idler pullies to front drive along with adding color and style with the anodized aluminum washers.
Most applications use more than one.
Item #: MODSHALLIP/AWMK

Idler Pulley Stud Kit W/ Blue Anodized Washer

Options
Description: Mounts idler pullies to front drive along with adding color and style with the anodized aluminum washers.
Most applications use more than one.
Item #: MODSHALLIP/AWMK

Idler Pulley Stud Kit W/ Silver Anodized Washer

Options
Description: Mounts idler pullies to front drive along with adding color and style with the anodized aluminum washers.
Most applications use more than one.
Item #: MODSHALLIP/AWMK

Idler Pulley Stud Kit W/ Natural (Unfinished) Anodized Washer

Options
Description: Mounts idler pulley with studs.
Most applications use more than one.
Item #: MODSTUDALLIPMSK

Camshaft Sensor Mounting Bolt Kit

Options
Description: Mounts cam sensor to the front cover.
Item #: MODSHALLCAMSMK

Crankshaft Sensor Mounting Bolt Kit

Options
Description: Mounts cam sensor to the front cover.
Item #: MODSHALLCRKSMK

Air Compressor Bolt Kit

Options
Description: The AC Compressor is mounted on the Passenger side/lower front of the engine. It mounts with three long bolts, this kit provides that hardware
Item #: MODSHALLACCMKARP

Air Compressor Line Mounting Bolt Kit

Options
Description: The AC Compressor is used to pressurize the gas in the AC system, that gas passes both in and out of the Compressor through ports on the Compressor that hook to the hoses, this kit attaches those hoses.
Item #: MODSHO304CACLMK

Oil Pan Mounting Bolt Kit

Options
Description: The Engine Oil Pan, holds the oil Supply for the engine. This supply is held in place by these Bolt Kits.
Item #: MODSHALLOPMK

Oil Pan Mounting Threaded Stud Kit

Options
Description: The Engine Oil Pan, holds the oil Supply for the engine. This supply is held in place by these Threaded Stud Kits.
Item #: MODSTUDALLOPMKARP

Oil Pan Mounting Bolt Kit (Extra Long)

Options
Description: On some applications, the Oil Pan needs longer Bolts/Studs due to the installation of Girdles, Spacers or Windage Trays. These kits supply longer fasteners for such situations.
Item #: MODSHALLOPMKXL

Oil Pan Mounting Threaded Stud Kit (Extra Long)

Options
Description: On some applications, the Oil Pan needs longer Bolts/Studs due to the installation of Girdles, Spacers or Windage Trays. These kits supply longer fasteners for such situations.
Item #: MODSTUDALLOPMKXLARP

Oil Pump Mounting Kit

Options
Description: The Oil Pump is the Heart of the engine. It pumps engine oil through-out the engine protecting and lubricating bearings, walls, and all moving parts. These kits is used to mount the Oil Pump to the block
Item #: MODSHALLOPMBK

Oil Pump Mounting Stud Kit

Options
Description: The Oil Pump is the Heart of the engine. It pumps engine oil through-out the engine protecting and lubricating bearings, walls, and all moving parts. These kits is used to mount the Oil Pump to the block
Item #: MODSTUDALLarp0.9

Rear Main Oil Seal Plate Mounting Kit

Options
Description: The Rear Main Seal Plate, mounts to the very rear of the block. It provides a secure mounting point for the Rear Main Oil Seal, which seals the back of the engine from leaking oil from around the crankshaft. These kits, are used to mount the plate to the engine.
Item #: MODSHALLRMOSK

Rear Main Oil Seal Plate Stud Mounting Kit

Options
Description: The Rear Main Seal Plate, mounts to the very rear of the block. It provides a secure mounting point for the Rear Main Oil Seal, which seals the back of the engine from leaking oil from around the crankshaft. These kits, are used to mount the plate to the engine.
Item #: MODSTUDRMOSK

Power Steering Pump Mounting Kit

Options
Description: The Power Steering Pump is located on the engine front/drivers side. These kits mount that pump with Bolts or Studs.

Power Steering Pump Mounting Stud Kit

Options
Description: The Power Steering Pump is located on the engine front/drivers side. These kits mount that pump with Bolts or Studs.
Item #: MODSTUDALLPSPMK10.9

Water Pump Mounting Bolt Kit

Options
Description: The Water Pump is mounted in the Front/Center of the engine. It circulates the engine coolant through-out the engine and the complete cooling system. These kits mount that Water Pump to it Mounting Location.
Item #: MODSHALLWPMK

Water Pump Mounting Stud Kit

Options
Description: The Water Pump is mounted in the Front/Center of the engine. It circulates the engine coolant through-out the engine and the complete cooling system. These kits mount that Water Pump to it Mounting Location.
Item #: MODSTUDALLWPMKarp0.9

Water Pump Pulley Mounting Bolt Kit

Options
Description: The Water Pump needs to be turned to pump the engine coolant. To do that, the Water Pump Pulley is attached to the pump, and the Serpentine Belt turns the Pulley. This kit mounts that Water Pump Pulley to the Pump.
Item #: MODSHALLWPPMK

Water Pump Pulley Mounting Stud Kit

Options
Description: The Water Pump needs to be turned to pump the engine coolant. To do that, the Water Pump Pulley is attached to the pump, and the Serpentine Belt turns the Pulley. This kit mounts that Water Pump Pulley to the Pump.
Item #: MODSTUDALLWPPMK

Belt Tensioner Mounting Bolt Kit

Options
Description: Mounts 3 bolt tensioner to front cover.
Item #: MODSHALLBTMK

Belt Tensioner Mounting Stud Kit

Options
Description: Mounts 3 bolt tensioner to front cover with studs.
Item #: MODSTUDALLBTMSKARP

Belt Tensioner (1-Bolt) Mounting Kit

Options
Description: The Belt Tensioner is what maintains the correct tension on the serpentine belt. These kits are offered to mount that Belt Tensioner to the Front Timing Cover.
Item #: MODSHALL1BBTMK

Belt Tensioner (1-Bolt) Mounting Stud Kit

Options
Description: The Belt Tensioner is what maintains the correct tension on the serpentine belt. These kits are offered to mount that Belt Tensioner to the Front Timing Cover.
Item #: MODSTUDALL1BBTMSKARP

Idler Pulley Mounting Bolt Kit

Options
Description: The Idler Pulley Bolts, Keep the Idler Pullies in place on the engine.
Item #: MODSHALLIPMK

Idler Pulley Mounting Stud Kit

Options
Description: The Idler Pulley Bolts, Keep the Idler Pullies in place on the engine.
Item #: MODSTUDALLIPMSK

Engine Oil Cooler/ Filter Mounting Bolt Kit

Options
Description: The Engine Oil Filter/Cooler Mount is located on the driver's side/front of the engine. It allows engine oil to pass in and out of the engine for cooling and filtering. These kits mount that mount.
Item #: MODSHALLEOCFMK

Engine Oil Cooler / Filter Mounting Stud Kit

Options
Description: The Engine Oil Filter/Cooler Mount is located on the driver's side/front of the engine. It allows engine oil to pass in and out of the engine for cooling and filtering. These kits mount that mount.
Item #: MODSTUDALLEOCFMKARP

Motor Mount Center Nut Kit

Options
Description: The Center Nut, it the Nut that goes to the large single center mounted stud, extending from the Motor Mount.
Item #: MODSHALLMMCSNK

Motor Mount Case Half Bolt Kit

Options
Description: On certain motor mounts, both stock and replacement, the ceter section is 2-piece and bolted together. This kit replaces stock mounting hardware for a more custom , stronger look. Two (2) kits needed for a complete set.
Item #: MODSHALLMMCH

Motor Mount Bolt Kit

Options
Description: Mounts motor mount to side of block.
Item #: MODSHALLMMBK

Starter Motor Bolt Kit

Options
Description: Mounts Engine Starter to block. Works with both 2 and 3-Bolt Starters.
Item #: MODSHALLSMBK

Starter Motor Threaded Stud Kit

Options
Description: As above, but uses Threaded Studs to mount the Starter.
Item #: MODSTUDALLSMSKARP

Starter Motor Power Connection Nut Kit

Options
Description: The Starter Motor is powered by a very larger battery cable, this kit supplies the nut and washer that attaches the power cable to the starter motor.
Item #: MODNUTALLSMPLN

Starter Motor Case Bolt Kit

Options
Description: The Starter Motor case is held together by several very long bolts, this kit supplies those bolts for a custom look.
Item #: MODSHALLSMCBKBO

Starter Motor Solenoid Mount Kit

Options
Description: The solenoid is what pulls the starter motor gear in to engage the flywheel, when the starter is energized. This kit mounts the solenoid to the starter motor with style.
Item #: MODSHALLSMSBK

Bellhousing Bolt Kit

Options
Description: Mounts the transmission to the engine block
Item #: MODSHALLBHBK

Bellhousing Threaded Stud Kit

Options
Description: Mounts the transmission to the engine block with studs.
Item #: MODSTUDALLBHSKARP

Engine Stand Bolt Kit

Options
Description: Engine Stand Bolt Kit, allows you to fasten the engine to your engine stand to perform work. Makes for a safe and sturdy way to mount engine. For those with Engine Stands with extra long stand-off's, we can offer a Extra Long Bolt Kit to accomodate those type Engine Stands...Just give us a call.
Item #: MODSHALLESBK

Passengers Side Dry Sump Mounting Plate Bolt Kit

Options
Description: Mounts our dry sump oil pump where the AC compressor normally mounts.
Item #: MODSHALLDSPPK

Drivers Side Dry Sump Mounting Plate Bolt Kit

Options
Description: Mounts our dry sump oil pump where the oil cooler normally mounts.
Item #: MODSHALLDSDSPPK

ARP Cam Tower Bolt Kits

Options
Description: Complete kit for both heads.
Item #: 156-100

Engine Main Side Bolt Kit (Iron Blocks)

Options
Description: Iron blocks.
Item #: MODSHIRONSBK001

Engine Main Side Bolt Kit (Aluminum Blocks)

Options
Description: Teksid, WAP, NVH
Item #: MODSHTEKSID001

Back To Top