2 Valve Bolt Kits
Front Timing Cover Bolt Kit
Options
Description: Mounts Engine Timing Cover to front of engine with Bolt or Threaded Stud Kits
Item #: MODSH96-042VFTC
2 Valve Front Timing Cover Threaded Stud Kit
Options
Description: Same as above, but this kit mounts the Front Timing Cover with Threaded Studs.
Item #: MODSTUD99-042VFTCSKarp0.9
Coil Mount Kit (Small)
Options
Description:The 2-Valve Engine has two (2) Coil Mounts, one SMALL and one LARGE. This kit mounts the SMALL COIL MOUNT to the engine
Item #: MODSH96-042VCM
Coil Mount Kit (Large)
Options
Description: The 2-Valve Engine has two (2) Coil Mounts, one SMALL and one LARGE. This kit mounts the LARGE COIL MOUNT to the engine.
Item #: MODSH96-042VCML
Alternator Mounting Kit
Options
Description: This kit Mounts the Alternator to the engine.
Item #: MODSH96-042VAMK
Intake Elbow Kit
Options
Description: The Intake Elbow is the curved part attached to the Intake Manifold. This kit mounts that part to the Manifold. The Throttle Body would mount to the other end.
Item #: MODSH96-042VIEMK
Fuel Rail Kit
Options
Description: This kit mounts the Fuel Rails, to each side of the Intake Manifold. The Fuel Rails supply fuel to the injectors and hold the firmly in place.
Item #: MODSH96-042VFRK
Power Steering Reservoir Kit
Options
Description: The Power Steering Reservoir holds the supply of power steering fluid needed by the system. This kit mounts that Reservoir it mount.
Item #: MODSH2VPSRK
Recirculation Valve Bolt Kit
Options
Description: This Bolt Kit mounts the Recirculation Valve to the Manifold.
Item #: MODSH96-042VRVK
Alternator Top Brace Kit
Options
Description: The Alternator has a Top Brace that helps stabilize it. This kit Mounts that Top Brace to the Alternator and the Intake Manifold.
Item #: MODSH96-042VATB
Electronic Vacuum Regulator
Options
Description: The Electronic Vacuum Regulator is another computer controlled engine emissions part. This kit mounts that Regulator to its mount.
Item #: MODSH96-042VEVR
Emissions Accessory Bracket
Options
Description: The Emissions Accessory Bracket is used to hold several emissions controls to the Intake manifold. This kit mounts that Bracket to the Manifold.
Item #: MODSH96-042VEAB
Throttle Cable Bracket Kit
Options
Description: This kit mounts that Throttle Cable Mount to the intake.
Item #: MODSH96-042VTCB
Rear MAP & Emissions Bracket
Options
Description: This kit mounts the Rear MAP & Emissions Bracket to the manifold.
Item #: MODSH96-042VMEB
Intake Manifold Bolt Kit
Options
Description: The Intake Manifold mounts straight to the heads, this kit fastens that Manifold in place with our Bolt Kits.
Item #: MODSH96-042VIMBK
Intake Manifold Threaded Stud Kit
Options
Description: The Intake Manifold mounts straight to the heads, this kit fastens that Manifold in place with our Threaded Stud Kits.
Item #: MODSTUD96-0412VTMBK
Intake Manifold Water Outlet Bolt Kit
Options
Description: The Water Outlet is where the hot engine coolant exits the engine and heads toward the Radiator. It is also where the Thermostat rest.
Item #: MODSH96-042VTMBK
Water Heater Connector Bolt Kit
Options
Description: The Water heater Connector is the fitting on the back of the passenger side head. It routes hot water from the head to the heater core. This kit mounts that fitting in place.
Item #: MODSHALLWHCBK
Water Heater Tube Connector Bolt Kit
Options
Description: The Water Heater Tube Connector Kit, is responsible for routing that hot water from the heater core, back to the Water Pump, The Tube is the passage way for this. This kit mounts that tube.
Item #: MODSHALLWHTCK
Idler Pulley Bolt Kit
Options
Description: Mounts idler pullies to front drive.
Most applications use more than one.
Most applications use more than one.
Item #: MODSHALLIPMK
Idler Pulley Bolt Kit W/ Black Anodized Washer
Options
Description: Mounts idler pullies to front drive along with adding color and style with the anodized aluminum washers.
Most applications use more than one.
Most applications use more than one.
Item #: MODSHALLIP/AWMK
Idler Pulley Bolt Kit W/ Red Anodized Washer
Options
Description: Mounts idler pullies to front drive along with adding color and style with the anodized aluminum washers.
Most applications use more than one.
Most applications use more than one.
Item #: MODSHALLIP/AWMK
Idler Pulley Bolt Kit W/ Gold Anodized Washer
Options
Description: Mounts idler pullies to front drive along with adding color and style with the anodized aluminum washers.
Most applications use more than one.
Most applications use more than one.
Item #: MODSHALLIP/AWMK
Idler Pulley Bolt Kit W/ Blue Anodized Washer
Options
Description: Mounts idler pullies to front drive along with adding color and style with the anodized aluminum washers.
Most applications use more than one.
Most applications use more than one.
Item #: MODSHALLIP/AWMK
Idler Pulley Bolt Kit W/ Silver Anodized Washer
Options
Description: Mounts idler pullies to front drive along with adding color and style with the anodized aluminum washers.
Most applications use more than one.
Most applications use more than one.
Item #: MODSHALLIP/AWMK
Idler Pulley Bolt Kit W/ Natural (Unfinished) Anodized Washer
Options
Description: Mounts idler pulley with studs.
Most applications use more than one.
Most applications use more than one.
Item #: MODSTUDALLIPMSK
Idler Pulley Stud Kit
Options
Description: Mounts idler pullies to front drive.
Most applications use more than one.
Most applications use more than one.
Item #: MODSTUDALLIPMSKARP
Idler Pulley Stud Kit W/ Black Anodized Washer
Options
Description: Mounts idler pullies to front drive along with adding color and style with the anodized aluminum washers.
Most applications use more than one.
Most applications use more than one.
Item #: MODSHALLIP/AWMK
Idler Pulley Stud Kit W/ Red Anodized Washer
Options
Description: Mounts idler pullies to front drive along with adding color and style with the anodized aluminum washers.
Most applications use more than one.
Most applications use more than one.
Item #: MODSHALLIP/AWMK
Idler Pulley Stud Kit W/ Gold Anodized Washer
Options
Description: Mounts idler pullies to front drive along with adding color and style with the anodized aluminum washers.
Most applications use more than one.
Most applications use more than one.
Item #: MODSHALLIP/AWMK
Idler Pulley Stud Kit W/ Blue Anodized Washer
Options
Description: Mounts idler pullies to front drive along with adding color and style with the anodized aluminum washers.
Most applications use more than one.
Most applications use more than one.
Item #: MODSHALLIP/AWMK
Idler Pulley Stud Kit W/ Silver Anodized Washer
Options
Description: Mounts idler pullies to front drive along with adding color and style with the anodized aluminum washers.
Most applications use more than one.
Most applications use more than one.
Item #: MODSHALLIP/AWMK
Idler Pulley Stud Kit W/ Natural (Unfinished) Anodized Washer
Options
Description: Mounts idler pulley with studs.
Most applications use more than one.
Most applications use more than one.
Item #: MODSTUDALLIPMSK
Camshaft Sensor Mounting Bolt Kit
Options
Description: Mounts cam sensor to the front cover.
Item #: MODSHALLCAMSMK
Crankshaft Sensor Mounting Bolt Kit
Options
Description: Mounts cam sensor to the front cover.
Item #: MODSHALLCRKSMK
Air Compressor Bolt Kit
Options
Description: The AC Compressor is mounted on the Passenger side/lower front of the engine. It mounts with three long bolts, this kit provides that hardware
Item #: MODSHALLACCMKARP
Air Compressor Line Mounting Bolt Kit
Options
Description: The AC Compressor is used to pressurize the gas in the AC system, that gas passes both in and out of the Compressor through ports on the Compressor that hook to the hoses, this kit attaches those hoses.
Item #: MODSHO304CACLMK
Oil Pan Mounting Bolt Kit
Options
Description: The Engine Oil Pan, holds the oil Supply for the engine. This supply is held in place by these Bolt Kits.
Item #: MODSHALLOPMK
Oil Pan Mounting Threaded Stud Kit
Options
Description: The Engine Oil Pan, holds the oil Supply for the engine. This supply is held in place by these Threaded Stud Kits.
Item #: MODSTUDALLOPMKARP
Oil Pan Mounting Bolt Kit (Extra Long)
Options
Description: On some applications, the Oil Pan needs longer Bolts/Studs due to the installation of Girdles, Spacers or Windage Trays. These kits supply longer fasteners for such situations.
Item #: MODSHALLOPMKXL
Oil Pan Mounting Threaded Stud Kit (Extra Long)
Options
Description: On some applications, the Oil Pan needs longer Bolts/Studs due to the installation of Girdles, Spacers or Windage Trays. These kits supply longer fasteners for such situations.
Item #: MODSTUDALLOPMKXLARP
Oil Pump Mounting Kit
Options
Description: The Oil Pump is the Heart of the engine. It pumps engine oil through-out the engine protecting and lubricating bearings, walls, and all moving parts. These kits is used to mount the Oil Pump to the block
Item #: MODSHALLOPMBK
Oil Pump Mounting Stud Kit
Options
Description: The Oil Pump is the Heart of the engine. It pumps engine oil through-out the engine protecting and lubricating bearings, walls, and all moving parts. These kits is used to mount the Oil Pump to the block
Item #: MODSTUDALLARP0.9
Rear Main Oil Seal Plate Mounting Kit
Options
Description: The Rear Main Seal Plate, mounts to the very rear of the block. It provides a secure mounting point for the Rear Main Oil Seal, which seals the back of the engine from leaking oil from around the crankshaft. These kits, are used to mount the plate to the engine.
Item #: MODSHALLRMOSK
Rear Main Oil Seal Plate Stud Mounting Kit
Options
Description:The Rear Main Seal Plate, mounts to the very rear of the block with STUDS. It provides a secure mounting point for the Rear Main Oil Seal, which seals the back of the engine from leaking oil from around the crankshaft. These kits, are used to mount the plate to the engine.
Power Steering Pump Mounting Kit
Options
Description: The Power Steering Pump is located on the engine front/drivers side. These kits mount that pump with Bolts or Studs.
Power Steering Pump Mounting Stud Kit
Options
Description: The Power Steering Pump is located on the engine front/drivers side. These kits mount that pump with Bolts or Studs.
Item #: MODSTUDALLPSPMK10.9
Water Pump Mounting Bolt Kit
Options
Description: The Water Pump is mounted in the Front/Center of the engine. It circulates the engine coolant through-out the engine and the complete cooling system. These kits mount that Water Pump to it Mounting Location.
Item #: MODSHALLWPMK
Water Pump Mounting Stud Kit
Options
Description: The Water Pump is mounted in the Front/Center of the engine. It circulates the engine coolant through-out the engine and the complete cooling system. These kits mount that Water Pump to it Mounting Location.
Item #: MODSTUDALLWPMKarp0.9
Water Pump Pulley Mounting Bolt Kit
Options
Description: The Water Pump needs to be turned to pump the engine coolant. To do that, the Water Pump Pulley is attached to the pump, and the Serpentine Belt turns the Pulley. This kit mounts that Water Pump Pulley to the Pump.
Item #: MODSHALLWPPMK
Water Pump Pulley Mounting Stud Kit
Options
Description: The Water Pump needs to be turned to pump the engine coolant. To do that, the Water Pump Pulley is attached to the pump, and the Serpentine Belt turns the Pulley. This kit mounts that Water Pump Pulley to the Pump.
Item #: MODSTUDALLWPPMK
Belt Tensioner Mounting Bolt Kit
Options
Description: Mounts 3 bolt tensioner to front cover.
Item #: MODSHALLBTMK
Belt Tensioner Mounting Stud Kit
Options
Description: Mounts 3 bolt tensioner to front cover with studs.
Item #: MODSTUDALLBTMSKARP300
Belt Tensioner (1-Bolt) Mounting Kit
Options
Description: The Belt Tensioner is what maintains the correct tension on the serpentine belt. These kits are offered to mount that Belt Tensioner to the Front Timing Cover.
Item #: MODSHALL1BBTMK
Belt Tensioner (1-Bolt) Mounting Stud Kit
Options
Description: The Belt Tensioner is what maintains the correct tension on the serpentine belt. These kits are offered to mount that Belt Tensioner to the Front Timing Cover.
Item #: MODSTUDALL1BBTMSKARP
Idler Pulley Mounting Bolt Kit
Options
Description: The Idler Pulley Bolts, Keep the Idler Pullies in place on the engine.
Item #: MODSHALLIPMK
Idler Pulley Mounting Stud Kit
Options
Description: The Idler Pulley Bolts, Keep the Idler Pullies in place on the engine.
Item #: MODSTUDALLIPMSK
Engine Oil Cooler/ Filter Mounting Bolt Kit
Options
Description: The Engine Oil Filter/Cooler Mount is located on the driver's side/front of the engine. It allows engine oil to pass in and out of the engine for cooling and filtering. These kits mount that mount.
Item #: MODSHALLEOCFMK
Engine Oil Cooler / Filter Mounting Stud Kit
Options
Description: The Engine Oil Filter/Cooler Mount is located on the driver's side/front of the engine. It allows engine oil to pass in and out of the engine for cooling and filtering. These kits mount that mount.
Item #: MODSTUDALLEOCFMKARP
Motor Mount Center Nut Kit
Options
Description: The Center Nut, it the Nut that goes to the large single center mounted stud, extending from the Motor Mount.
Item #: MODSHALLMMCSNK
Motor Mount Case Half Bolt Kit
Options
Description: On certain motor mounts, both stock and replacement, the ceter section is 2-piece and bolted together. This kit replaces stock mounting hardware for a more custom , stronger look. Two (2) kits needed for a complete set.
Item #: MODSHALLMMCH
Starter Motor Bolt Kit
Options
Description: Mounts Engine Starter to block. Works with both 2 and 3-Bolt Starters.
Item #: MODSHALLSMBK
Starter Motor Threaded Stud Kit
Options
Description: As above, but uses Threaded Studs to mount the Starter.
Item #: MODSTUDALLSMSKARP
Starter Motor Power Connection Nut Kit
Options
Description: The Starter Motor is powered by a very larger battery cable, this kit supplies the nut and washer that attaches the power cable to the starter motor.
Item #: MODNUTALLSMPLN
Starter Motor Case Bolt Kit
Options
Description: The Starter Motor case is held together by several very long bolts, this kit supplies those bolts for a custom look.
Item #: MODSHALLSMCBKBO
Starter Motor Solenoid Mount Kit
Options
Description: The solenoid is what pulls the starter motor gear in to engage the flywheel, when the starter is energized. This kit mounts the solenoid to the starter motor with style.
Item #: ODSHALLSMSBK
Bellhousing Bolt Kit
Options
Description: Mounts the transmission to the engine block
Item #: MODSHALLBHBK
Bellhousing Threaded Stud Kit
Options
Description: Mounts the transmission to the engine block with studs.
Item #: MODSTUDALLBHSKARP
Engine Stand Bolt Kit
Options
Description: Engine Stand Bolt Kit, allows you to fasten the engine to your engine stand to perform work. Makes for a safe and sturdy way to mount engine. For those with Engine Stands with extra long stand-off's, we can offer a Extra Long Bolt Kit to accomodate those type Engine Stands...Just give us a call.
Item #: MODSHALLESBK
Passengers Side Dry Sump Mounting Plate Bolt Kit
Options
Description: Mounts our dry sump oil pump where the AC compressor normally mounts.
Item #: MODSHALLDSPPK
Drivers Side Dry Sump Mounting Plate Bolt Kit
Options
Description: Mounts our dry sump oil pump where the oil cooler normally mounts.
Item #: MODSHALLDSDSPPK
2 Valve Cam Bearing Cap Bolt Kit
Options
Description: Mounts the cam shaft caps to the 2 valve heads.
2 kits needed per engine
2 kits needed per engine
Item #: MODSH96-042VCBCB
2 Valve Cam Bearing Cap Stud Kit
Options
Description: Mounts the cam shaft caps to the 2v heads with studs.
2 kits needed per engine
2 kits needed per engine
Item #: MODSTUD2VCBCK10.9
Engine Main Side Bolt Kit (Aluminum Blocks)
Options
Description: Teksid, WAP, NVH
Item #: MODSHTEKSID001
Back To Top